Page 1 of 1

Asustor as6212rd link aggregation don't work

PostPosted: Sat Jul 18, 2020 5:49 am
by cadu
Hi everyone,

Recently I bought an Asustor as6212rd to use as an storage in my company.
I added the disks and configured the iSCSI system to map in my domain server, it worked as I expected, just fine. My server has a NIC with 3 LANs interfaces and it works fine with my manageable switch.

But all the test that I did with the as6212rd link aggregation, didn't works as expected. The transfer speeds caps on 1gb and everytime I try to transfers files with 2 PCs or devices, the speed drops by half, and there's some moments that it's just "freeze" the transfer, and it happens both on the iSCSI system and transfering files direct to a shared folder.
I tested all the aggregation modes, same situation on all.

My switch is Intelbras SG 5204 MR it's fully manageable.

Anybody knows what's happening?

Thanks!

Re: Asustor as6212rd link aggregation don't work

PostPosted: Mon Jul 20, 2020 10:47 am
by orion
NAS Link aggregation mode should match to switch settings. No ideas about your switch. I'll suggest you to send a support request to asustor directly. https://support.asustor.com/