AS4004T - Use it as switch

Looking for discussion about hardware compatibility? Look no further.

Moderator: Lillian.W@AST

Post Reply
Heiko_BV
Posts: 3
youtube meble na wymiar Warszawa
Joined: Fri Jan 24, 2020 3:38 pm

AS4004T - Use it as switch

Post by Heiko_BV »

Hi everyone,

is it possible to use the 3 NIC´s as switch ?

Szenario:

I want to connect a PC with 10 gbit directly to the 10 gbit Nas-Port and use another 1 Gbit- Nas-Port to connect my network. So i save the money for a 10gbit Switch.

Thanks

Heiko
User avatar
father.mande
Posts: 1808
Joined: Sat Sep 12, 2015 2:55 am
Location: La Rochelle (France)

Re: AS4004T - Use it as switch

Post by father.mande »

Hi,
Heiko_BV wrote:Hi everyone,
is it possible to use the 3 NIC´s as switch ?
Szenario:
I want to connect a PC with 10 gbit directly to the 10 gbit Nas-Port and use another 1 Gbit- Nas-Port to connect my network. So i save the money for a 10gbit Switch.
Thanks
Heiko

Even if in Linux, lot of things are possible ... I don't think you can configure this case using the default tools provide by Asustor in A.D.M.
But if you have some expertise in Linux network admin ... some possibilities can be offered.

BUT FIRST remember that a NAS IS NOT a network switch nor a dedicated network environment ... and that some application can generate indirect problem and binding problem based on a different network approach, so need tests and control.

Basically, the tool are present :
... kernel IP forwarding (ex. if each LAN have a different sub-net), bridge tools (to support multiple LAN in the same sub-network), iptables to add (even limited) some security and control.
BUT
... ebt routing are not present (require to add yourself the kernel module require), even arp table exist mac address table for each LAN (if multiple client per LAN) to prevent parallel send when it's not necessary don't exist.

So solution exist and using a simple bridge can be a good start phase (but keep in mind that an error in network can lock your NAS (except if you have screen / keyboard and Asportal terminal) ... so always keep a door to save the situation in case of error.)

Philippe.
Last edited by father.mande on Fri Jan 24, 2020 8:44 pm, edited 1 time in total.
AS6602T / AS5202T /AS5002T / AS1002T / FS6706T
Heiko_BV
Posts: 3
Joined: Fri Jan 24, 2020 3:38 pm

Re: AS4004T - Use it as switch

Post by Heiko_BV »

Hi Philippe,

first of all: Thank you for your answer. I will try to get a solution with linux tools.

If i fail, i have a backup idea: I will connect the 10 gig- NAS -Port with a second IP- Subnet to the new 10 gbit Nic of my pc... Pc and NAS will also remain with a second Nic in the first net. So i can reach the NAS with 2 IP´s (only from my pc) and my pc stays in the main network...

Greetings

Heiko
Heiko_BV
Posts: 3
Joined: Fri Jan 24, 2020 3:38 pm

Re: AS4004T - Use it as switch

Post by Heiko_BV »

Hi again,

Backupidea is working fine. Build a Raid 0 with 3 HDD´s (3+3+2) and backup the data to another 4 TB. Speed is about 290 MB/s write an 280 MB/s read. Next step will be using SSD. But nowadays to expensive...

Thanks for help

Heiko
Post Reply

Return to “Hardware Compatibility”