It is currently Thu Jan 21, 2021 1:32 am
All times are UTC + 8 hours

Low speed AFP protocol

Looking for discussion about hardware compatibility? Look no further.

Low speed AFP protocol

Postby obscur » Fri Oct 11, 2019 9:31 pm

Help me please! I was almost desperate to solve the problem. Technical support is not responding, although I provided them with a username and password from the NAS.

Model: AS4004T
ADM Version: ADM 3.4.2.R932

on a 10-gigabit connector, the exchange rate with the storage is only 250-300 megabytes. The storage in this case is 2 SSD drives in raid0. And it produces the same speed on a raid0 array of 2 HHD disks. That is, 10 gigabit potential is used only by a third. And it made no sense to buy storage with such a connector, nor SSD drives. I stick the storage with a standard wire in the 10gbe-thunderbolt3 adapter and then in thunderbolt3 on imac.
 I would like to have at least 600-700 megabytes per second.

how do i achieve this?

Adapter: ... rview.html
SSD: ... er/860dct/
Posts: 1
Joined: Fri Oct 11, 2019 9:25 pm

Re: Low speed AFP protocol

Postby orion » Mon Oct 14, 2019 10:33 am

Finding bottlenecks is difficult. I think you may try Windows protocol first because Asustor tested it under Windows:
User avatar
Posts: 2858
Joined: Wed May 29, 2013 11:09 am

Return to Hardware Compatibility

  • You cannot post new topics in this forum
    You cannot reply to topics in this forum
    You cannot edit your posts in this forum
    You cannot delete your posts in this forum
    You cannot post attachments in this forum
  • Who is online

    Users browsing this forum: No registered users and 2 guests