Raid 5, incomplete volume

Got a question about our NAS utilities? The answer lies within.

Moderator: Lillian.W@AST

Post Reply
Warglock
Posts: 2
youtube meble na wymiar Warszawa
Joined: Wed Nov 07, 2018 3:31 am

Raid 5, incomplete volume

Post by Warglock »

Hello,

I own a NAS AS1004T with 3 HDD (8To each). I bought a fourth HDD to increase the capacity.

However when I wanted to do the fusion, instead of getting 21To I only got 15 To. Do you have any explanation for this? And if so, any solution to offer? (if possible without formatting) I already tried to do a disk cleanup but it didn't solved my issue.

I'm a beginer and don't know much about NAS, so if I have to check stuff for you, could you explain where and how to ?

Thank you for reading!
User avatar
orion
Posts: 3482
Joined: Wed May 29, 2013 11:09 am

Re: Raid 5, incomplete volume

Post by orion »

After your NAS finished RAID expansion (synchronizing RAID), you need to go to ADM web -> Storage Manager -> select the specific Volume -> Expand Capacity. You can refer to: https://www.asustor.com/en/online/Colle ... ?topic=352
Warglock
Posts: 2
Joined: Wed Nov 07, 2018 3:31 am

Re: Raid 5, incomplete volume

Post by Warglock »

Thank you for the quick response. I found an explanation ; the maximum space for my NAS is 14 000GO.
Post Reply

Return to “NAS Utilities”