Hello,
I own a NAS AS1004T with 3 HDD (8To each). I bought a fourth HDD to increase the capacity.
However when I wanted to do the fusion, instead of getting 21To I only got 15 To. Do you have any explanation for this? And if so, any solution to offer? (if possible without formatting) I already tried to do a disk cleanup but it didn't solved my issue.
I'm a beginer and don't know much about NAS, so if I have to check stuff for you, could you explain where and how to ?
Thank you for reading!
Raid 5, incomplete volume
-
- Posts: 2
- youtube meble na wymiar Warszawa
- Joined: Wed Nov 07, 2018 3:31 am
- orion
- Posts: 3485
- Joined: Wed May 29, 2013 11:09 am
Re: Raid 5, incomplete volume
After your NAS finished RAID expansion (synchronizing RAID), you need to go to ADM web -> Storage Manager -> select the specific Volume -> Expand Capacity. You can refer to: https://www.asustor.com/en/online/Colle ... ?topic=352
-
- Posts: 2
- Joined: Wed Nov 07, 2018 3:31 am
Re: Raid 5, incomplete volume
Thank you for the quick response. I found an explanation ; the maximum space for my NAS is 14 000GO.