Volume1 status degraded (304T)

Moderator: Lillian.W@AST

Post Reply
charston
Posts: 4
youtube meble na wymiar Warszawa
Joined: Sun Nov 22, 2015 11:52 pm

Volume1 status degraded (304T)

Post by charston »

HI,
I have a problem with my NAS (304T) from the released ADM 3.0. One of my 4 HDD is faulty, and the status is degraded. After when I restart my NAS has a red LED is lighting continously and a green LED is blinking on that slot 3. LAst was same before restart, but on slot 4.
screenshots:

Image

Image


How to solve the problem?

thx
itdaboyz
Posts: 141
Joined: Tue Oct 14, 2014 7:21 pm

Re: Volume1 status degraded (304T)

Post by itdaboyz »

Change the bad disc for a new one.
dkobelak
Posts: 101
Joined: Wed Jun 08, 2016 2:21 am

Re: Volume1 status degraded (304T)

Post by dkobelak »

From what I can see based on your two screenshots, you had a bad disk in slot4 and should have replaced it at that point. When you did a reboot, disk in slot3 seems to have gotten an error and your RAID5 went down.. from that second screenshot i can see RAID5 is inactive (inaccessible). i would get in touch with support and see if they can manage to get your disk3 back online manually and bring the RAID5 back to active (degraded) state.. you can then try to replace the faulty disk4 first, let it rebuild and then replace disk3. not sure if this will work, and even if it does there might or might not be some data corruption...
AS-5104T running stock memory;RAID 5 - 4x3TB Toshiba DT01ACA300;BIOS: v1.21 - ADM: 4.0.4.RQO2
AS-6204T running stock memory;RAID 5 - 3x8TB Seagate Ironwolf ST8000VN0022;BIOS: v2.23 - ADM: 4.0.4.RQO2
Post Reply

Return to “[Official] For AS-30X Series”