Hi,
I would like to use RAID 0 with my NAS.
I have 2 seagate 2 To in the first and the second bay but when i go to storage manager i have no choice, and my disk are in RAID 1.
how i can change RAID1 to RAID0 because i would like to have maximum space ( <4To)
Please help....
RAID O on AS 604T
-
- Posts: 11
- youtube meble na wymiar Warszawa
- Joined: Thu Dec 20, 2012 2:16 pm
- Steve@AST
- Posts: 150
- Joined: Tue Jun 05, 2012 4:20 pm
Re: RAID O on AS 604T
Hi JJ RAF,
In ADM, we have a limit that first volume can't be removed.
therefore, you need to go to [ Settings ] --> [Factory Default]
Click [Apply] button, you will start to re-initialize the NAS, and then you can choose the RAID level again.
note: Please backup your important data before re-initialize NAS
Cheers,
Wall-E
In ADM, we have a limit that first volume can't be removed.
therefore, you need to go to [ Settings ] --> [Factory Default]
Click [Apply] button, you will start to re-initialize the NAS, and then you can choose the RAID level again.
note: Please backup your important data before re-initialize NAS
Cheers,
Wall-E
ASUSTOR AS-602T
MacBook Air
iPhone 4s, New iPad, iPod nano
MacBook Air
iPhone 4s, New iPad, iPod nano
-
- Posts: 11
- Joined: Thu Dec 20, 2012 2:16 pm
Re: RAID O on AS 604T
Thx for you help.
so i explain what i do for next user who wants to do the same thing
you have to put a harddisk in the first bay, restore with factory default.
when the nas restart, initialize the nas.
when the nas is ready, you can put two harddisk in the bay 3 and 4
then go to storage manager and you can choose RAID 0 or other RAID for the volume 2.
sorry for my bad english, i hope you can understand
so i explain what i do for next user who wants to do the same thing
you have to put a harddisk in the first bay, restore with factory default.
when the nas restart, initialize the nas.
when the nas is ready, you can put two harddisk in the bay 3 and 4
then go to storage manager and you can choose RAID 0 or other RAID for the volume 2.
sorry for my bad english, i hope you can understand
- Steve@AST
- Posts: 150
- Joined: Tue Jun 05, 2012 4:20 pm
Re: RAID O on AS 604T
Hi JJ RAF,
If other users want to change the RAID level of volume 1
they can follow the steps below
1. Power on NAS with original HDDs
2. Back up the important data in volume 1
3. Go to [Settings] --> [Factory Default] and click [Apply]
4. User will see an re-initialize wizard on the web browser, following the wizard till volume setup page, select RAID level they want
5. Once finish the settings, user will have a new volume with the RAID level they want.
cheers,
Wall-E
If other users want to change the RAID level of volume 1
they can follow the steps below
1. Power on NAS with original HDDs
2. Back up the important data in volume 1
3. Go to [Settings] --> [Factory Default] and click [Apply]
4. User will see an re-initialize wizard on the web browser, following the wizard till volume setup page, select RAID level they want
5. Once finish the settings, user will have a new volume with the RAID level they want.
cheers,
Wall-E
ASUSTOR AS-602T
MacBook Air
iPhone 4s, New iPad, iPod nano
MacBook Air
iPhone 4s, New iPad, iPod nano