hello everyone!!!
need help with getting the vpn working and then assigning apps to use vpn or isp.
i can get the vpn to connect for a few but when i try to connect to the internet i get nothing.
im using private internet access for my vpn.
settings im using are
server: aus.privateinternetaccess.com
Protocol: UDP
Port: 1197
Account: p*******
Password: ********
Certificate: ca.rsa.4096.crt (every time i go to edit it's always blank)
Cipher: aes-256-cbc
Authentication: sha256
only have route all clint traffic through vpn server ticked.
when and if i can get the vpn working i want to be able to chose what apps go though the vpn and thought the isp
current routing table is
no vpn
default via 192.168.0.1 dev bond0
192.168.0.0/26 dev bond0 src 192.168.0.3
vpn on with all traffic ticked
0.0.0.0/1 via 10.21.10.5 dev tun255
default via 192.168.0.1 dev bond0
10.13.10.1 via 10.13.10.5 dev tun255
10.13.10.5 dev tun255 src 10.13.10.6
128.0.0.0/1 via 10.13.10.5 dev tun255
168.1.23.22 via 192.168.0.1 dev bond0
192.168.0.0/26 dev bond0 src 192.168.0.3
vpn on with all traffic not ticked
default via 192.168.0.1 dev bond0
10.13.10.5 dev tun255 src 10.13.10.6
192.168.0.0/26 dev bond0 src 192.168.0.3
thanks in advance,
nick
openvpn help and app assign networks
-
- Posts: 15
- youtube meble na wymiar Warszawa
- Joined: Thu Feb 04, 2016 12:18 pm
-
- Posts: 12
- Joined: Thu Mar 15, 2018 7:08 pm
Re: openvpn help and app assign networks
I too am having the same issues.
I have Successfully setup the Private Internet Access (PIA) VPN detail in my new Asustor 6204T OpenVPN and connected
I noticed none of the apps appears to be using the OpenVPN connection. I see this as there no data up/down figures increasing for the OpenVPN connection. I also tried a simple Torrent/MagentIP check and this also confirms is using my main ISP IP address.
How do I connect an Asustor App installed in the NAS to use the OpenVPN connection in the NAS?
Many thanks
I have Successfully setup the Private Internet Access (PIA) VPN detail in my new Asustor 6204T OpenVPN and connected
I noticed none of the apps appears to be using the OpenVPN connection. I see this as there no data up/down figures increasing for the OpenVPN connection. I also tried a simple Torrent/MagentIP check and this also confirms is using my main ISP IP address.
How do I connect an Asustor App installed in the NAS to use the OpenVPN connection in the NAS?
Many thanks
-
- Posts: 14
- Joined: Wed Feb 07, 2018 1:25 am
Re: openvpn help and app assign networks
how did you guys install openvpn in first place? Its not on app central
-
- Posts: 12
- Joined: Thu Mar 15, 2018 7:08 pm
Re: openvpn help and app assign networks
@AngeL - Is already installed.
See this Asustor How-To guide
https://www.asustor.com/en/online/Colle ... ?topic=322
See this Asustor How-To guide
https://www.asustor.com/en/online/Colle ... ?topic=322
-
- Posts: 3
- Joined: Sun Apr 01, 2018 4:01 pm
Re: openvpn help and app assign networks
Hi all,
I'm wondering the exact same thing. I've setup PrivateInternetAccess VPN also but when I click "Route all client traffic through the VPN server" all seems to work (i think). But I cant then access the server using DDNS (want to acess ftp, etc). Can anyone help?
I'm wondering the exact same thing. I've setup PrivateInternetAccess VPN also but when I click "Route all client traffic through the VPN server" all seems to work (i think). But I cant then access the server using DDNS (want to acess ftp, etc). Can anyone help?
-
- Posts: 3
- Joined: Sun Apr 01, 2018 4:01 pm
Re: openvpn help and app assign networks
Now I've come accross port forwarding script on Private Internet Access (https://www.privateinternetaccess.com/f ... nced-users). Does anyone know if this would work on our system?
-
- Posts: 20
- Joined: Thu Nov 24, 2022 10:03 pm
Re: openvpn help and app assign networks
Sorry, I need to bring this old case to the front again.
I have the same problem on my AS6704T: The open vpn client is configured and connected to the VPN server. But nothing on the NAS used this VPN connection. Send and receive = 0.
Do you have any ideas about it?
Thanks, Klaus
I have the same problem on my AS6704T: The open vpn client is configured and connected to the VPN server. But nothing on the NAS used this VPN connection. Send and receive = 0.
Do you have any ideas about it?
Thanks, Klaus
AS6704T
-
- Posts: 64
- Joined: Tue Oct 13, 2020 10:52 pm
Re: openvpn help and app assign networks
I have the same issue.
Is there any way to find out via the console if the VPN tunnel is used for data transfer? Maybe it is just displayed incorrectly by the GUI?
I am grateful for any information
Dirk
Is there any way to find out via the console if the VPN tunnel is used for data transfer? Maybe it is just displayed incorrectly by the GUI?
I am grateful for any information
Dirk
- father.mande
- Posts: 1819
- Joined: Sat Sep 12, 2015 2:55 am
- Location: La Rochelle (France)
Re: openvpn help and app assign networks
Hi,
When you use a VPN ... the use of this VPN is based (as any network) on the network route ...
to get it :
ip route show
... due to multiple table availability alos check rule
ip rule show
... and use table name (it's at end of the line) just ignore fwmark table (if exist))
ip route show table XXXX
So Now you can know route used based on ip target, and you can add route if need (normally it's in the VPN interface ???) , sorry I don't use ADM interface (OpenVPN or wireguard), so I don't use the GUI. ... but normally you ahve the choice to use VPN as the default gateway (all go through the VPN ... but it's generally not a good idea ... but work and easy to configure.
for a specific target, you can check the route used by using :
tracroute
ex. route to google DNS (you can used full qualified dns name as target ...
Last, remember that route directive is used in order, so if a route is define before a larger one, the first is used the second ignored.
Philippe.
NB it's always possible to manage route by yourself, even ADM is used for configuration ...
When you use a VPN ... the use of this VPN is based (as any network) on the network route ...
to get it :
ip route show
... due to multiple table availability alos check rule
ip rule show
... and use table name (it's at end of the line) just ignore fwmark table (if exist))
ip route show table XXXX
So Now you can know route used based on ip target, and you can add route if need (normally it's in the VPN interface ???) , sorry I don't use ADM interface (OpenVPN or wireguard), so I don't use the GUI. ... but normally you ahve the choice to use VPN as the default gateway (all go through the VPN ... but it's generally not a good idea ... but work and easy to configure.
for a specific target, you can check the route used by using :
tracroute
ex. route to google DNS (you can used full qualified dns name as target ...
Code: Select all
traceroute 8.8.8.8
traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 46 byte packets
1 192.168.10.1 (192.168.10.1) 0.507 ms 0.457 ms 0.230 ms
2 10.69.64.1 (10.69.64.1) 7.523 ms 9.710 ms 8.049 ms
3 nnn.net-xxxxx.fr (80.236.9.113) 7.854 ms 8.228 ms 9.096 ms
4 129.1.nn.81.rev.xxx.net (81.65.1.129) 8.847 ms 9.638 ms 8.904 ms
5 220.vvv.6.194.rev.xxx.net (194.6.147.220) 10.385 ms 15.551 ms 9.765 ms
6 220.vvv.6.194.rev.xxx.net (194.6.147.220) 9.389 ms 9.005 ms 10.098 ms
7 72.14.vvv.30 (72.14.vvv.30) 9.551 ms 11.862 ms 7.913 ms
etc. ...
Philippe.
NB it's always possible to manage route by yourself, even ADM is used for configuration ...
AS6602T / AS5202T /AS5002T / AS1002T / FS6706T
-
- Posts: 64
- Joined: Tue Oct 13, 2020 10:52 pm
Re: openvpn help and app assign networks
Sorry Philippe,
I don't quite understand what you wrote yet, and I need to read up on the subject first.
I don't quite understand what you wrote yet, and I need to read up on the subject first.