The lines representing the AS6004U are these:Nazar78 wrote:For the AS6004U perhaps you could compare the lsusb outputs between when it's connected and not as it's hard to tell which is the device unless you lookup all the VEN_DEV_IDs.
Bus 002 Device 005: ID 174c:55aa ASMedia Technology Inc.:Name: ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Bus 002 Device 007: ID 174c:55aa ASMedia Technology Inc.:Name: ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Bus 002 Device 003: ID 174c:3074 ASMedia Technology Inc.:ASM1074 SuperSpeed hub
Bus 002 Device 004: ID 174c:55aa ASMedia Technology Inc.:Name: ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Bus 002 Device 006: ID 174c:55aa ASMedia Technology Inc.:Name: ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Bus 001 Device 002: ID 174c:2074 ASMedia Technology Inc.:ASM1074 High-Speed hub
That´s when connected to the AS5304T. When connected to the Linux Box these are the signs:
Bus 002 Device 002: ID 174c:3074 ASMedia Technology Inc.:ASM1074 SuperSpeed hub
Bus 001 Device 006: ID 174c:2074 ASMedia Technology Inc.:ASM1074 High-Speed hub
The controller in question is probably this one - https://www.asmedia.com.tw/product/3Eey ... 5SX9YT1zy8
One observation: The AS6004U has a feature that puts it in sync with the mother NAS powerwise. When the NAS is in an active state, the enclosure is active. The front LEDs turn green and blue. When the NAS powers down, the LED on the AS6004U turns orange.
When I connect the enclosure to a device like my laptop or the Linux box, the light stays orange. So it probably needs some kind of command over USB to even turn on.