It is currently Wed Nov 21, 2018 3:15 am
All times are UTC + 8 hours

Raid 5, incomplete volume

Got a question about our NAS utilities? The answer lies within.

Raid 5, incomplete volume

Postby Warglock » Wed Nov 07, 2018 3:50 am

Hello,

I own a NAS AS1004T with 3 HDD (8To each). I bought a fourth HDD to increase the capacity.

However when I wanted to do the fusion, instead of getting 21To I only got 15 To. Do you have any explanation for this? And if so, any solution to offer? (if possible without formatting) I already tried to do a disk cleanup but it didn't solved my issue.

I'm a beginer and don't know much about NAS, so if I have to check stuff for you, could you explain where and how to ?

Thank you for reading!
Warglock
 
Posts: 2
Joined: Wed Nov 07, 2018 3:31 am

Re: Raid 5, incomplete volume

Postby orion » Wed Nov 07, 2018 10:20 am

After your NAS finished RAID expansion (synchronizing RAID), you need to go to ADM web -> Storage Manager -> select the specific Volume -> Expand Capacity. You can refer to: https://www.asustor.com/en/online/College_topic?topic=352
User avatar
orion
 
Posts: 2096
Joined: Wed May 29, 2013 11:09 am

Re: Raid 5, incomplete volume

Postby Warglock » Sat Nov 10, 2018 11:17 pm

Thank you for the quick response. I found an explanation ; the maximum space for my NAS is 14 000GO.
Warglock
 
Posts: 2
Joined: Wed Nov 07, 2018 3:31 am

Return to NAS Utilities

  • You cannot post new topics in this forum
    You cannot reply to topics in this forum
    You cannot edit your posts in this forum
    You cannot delete your posts in this forum
    You cannot post attachments in this forum
  • Who is online

    Users browsing this forum: No registered users and 2 guests