Enabling Web Server is not possible

Moderator: Lillian.W@AST

ben1600
Posts: 3
youtube meble na wymiar Warszawa
Joined: Thu Nov 25, 2021 1:35 am

Enabling Web Server is not possible

Post by ben1600 »

I am using an ASUSTOR AS5304T with ADM version 4.0.0.RN53.

I want to activate the web service port in the Web Center but I always get the following error message, no matter which port number I select:

The specified port is being used by another service. Please select another port. (Ref. 5032)

What am I doing wrong?
User avatar
orion
Posts: 3482
Joined: Wed May 29, 2013 11:09 am

Re: Enabling Web Server is not possible

Post by orion »

Did you try to change to another port?
ben1600
Posts: 3
Joined: Thu Nov 25, 2021 1:35 am

Re: Enabling Web Server is not possible

Post by ben1600 »

yes I have, but every entry leads to the same error message
User avatar
orion
Posts: 3482
Joined: Wed May 29, 2013 11:09 am

Re: Enabling Web Server is not possible

Post by orion »

Mine is just fine. Not sure what you tried. If you cannot provide detailed info here, I think you should send a support ticket to asustor directly. https://support.asustor.com/
mario_ili
Posts: 4
Joined: Thu Jan 29, 2015 5:34 am

Re: Enabling Web Server is not possible

Post by mario_ili »

I have the same problem. I also can't turn on the Web server on port 80 and 443. Error: The specified port is being used by another service. Please select another port. (Ref. 5032). Another port can be activated, but this is not desirable! I don't want the server to redirect port 80 and 443 to ADM! Where is the mistake? Netstat writes that it is used by myhttpd!
User avatar
orion
Posts: 3482
Joined: Wed May 29, 2013 11:09 am

Re: Enabling Web Server is not possible

Post by orion »

Yes, port 80 and 443 are occupied by ADM.
mario_ili
Posts: 4
Joined: Thu Jan 29, 2015 5:34 am

Re: Enabling Web Server is not possible - FIXED

Post by mario_ili »

This is an advanced intervention in the system, if you do not know what you are doing, do not do it. Before any intervention in the system, I recommend backing up the file !!!!

The [Web Services] section with "T80 and T443 ports" is probably still set up in "/usr/builtin/etc/resource.conf". As of ADM 4.0, it is not [Web services], but [webcenter]. You need to find [Web Services] and remove this section. Find the [webcenter] section and insert ports T80, T443 here. The result will be as follows:
[webcenter]
Display = Web Center
Port = T80, T443
Share = Web /

or optionally find a service that owns T80 and T443 ports.
User avatar
orion
Posts: 3482
Joined: Wed May 29, 2013 11:09 am

Re: Enabling Web Server is not possible

Post by orion »

orion wrote:Yes, port 80 and 443 are occupied by ADM.
Revised: ADM 4.0.0 supports web server using 80 and 443. I just tried these ports. It works. (The old ADM versions does not support it.)
TheBinary1
Posts: 12
Joined: Tue May 14, 2019 6:50 am

Re: Enabling Web Server is not possible

Post by TheBinary1 »

orion wrote:
orion wrote:Yes, port 80 and 443 are occupied by ADM.
Revised: ADM 4.0.0 supports web server using 80 and 443. I just tried these ports. It works. (The old ADM versions does not support it.)
Nope. It is broken in ADM 4.0.0

Old ADM 3.5 supports Web Server on ports 80 and 443 and was working without issues.
Last edited by TheBinary1 on Wed Dec 08, 2021 2:44 am, edited 1 time in total.
TheBinary1
Posts: 12
Joined: Tue May 14, 2019 6:50 am

Re: Enabling Web Server is not possible - FIXED

Post by TheBinary1 »

mario_ili wrote:This is an advanced intervention in the system, if you do not know what you are doing, do not do it. Before any intervention in the system, I recommend backing up the file !!!!

The [Web Services] section with "T80 and T443 ports" is probably still set up in "/usr/builtin/etc/resource.conf". As of ADM 4.0, it is not [Web services], but [webcenter]. You need to find [Web Services] and remove this section. Find the [webcenter] section and insert ports T80, T443 here. The result will be as follows:
[webcenter]
Display = Web Center
Port = T80, T443
Share = Web /

or optionally find a service that owns T80 and T443 ports.
This solution has no impact and does not work.
Post Reply

Return to “ADM general”