Re: Getting 5104T, Feedback on Drives, Raid Config, Media Streamer
Posted: Tue Oct 27, 2015 6:54 am
You could also use Clinton's nzbToMedia Scripts to automate transcoding of downloaded content as a post-processing option. As it's script-based you'll need to fill out a lot of fields in the config file in the section pertaining to transcoding. But there is an option in there to preserve original files if you wish to transcode to lower qualities and keep the original copies as well.
It's bundled with nzbget available on the App Store, and the config file (autoprocessmedia.cfg) can be found in the 'nzbToMedia' folder on the 'Download' share post-install. The script is a bit of a PITA to get working properly if your not absolutely sure what your doing, having said that if you've got enough nouse to set up Deluge, Sonarr and nzbget/sabnzbd+ you should be ok.
Bear in mind, some settings present in the autoprocessmedia.cfg file are exposed in the nzbget GUI, but not ALL of them, so manual configuration of the config file will certainly be required to change / verify some settings.
For settings guidance, check out the nzbToMedia settings wiki, here.
It's bundled with nzbget available on the App Store, and the config file (autoprocessmedia.cfg) can be found in the 'nzbToMedia' folder on the 'Download' share post-install. The script is a bit of a PITA to get working properly if your not absolutely sure what your doing, having said that if you've got enough nouse to set up Deluge, Sonarr and nzbget/sabnzbd+ you should be ok.
Bear in mind, some settings present in the autoprocessmedia.cfg file are exposed in the nzbget GUI, but not ALL of them, so manual configuration of the config file will certainly be required to change / verify some settings.
For settings guidance, check out the nzbToMedia settings wiki, here.