Page 1 of 1

Moving from AS6404T to new Nimbustor4

Posted: Sat May 25, 2019 10:19 pm
by roterdrachen
Hi I have here:
- AS6404T with 1SSD (Boot) and 2 HD
- AS6004U expansion with 3 HD
- AS-T10G network card in my PC

I´m going to buy the new Nimbustor4 in the future.
I don´t want to copy everything from the scratch from my old backup system to the new Nimbustor4 system.

Is there a possibility to:
Exchange the AS6404T with all devices (1xSSD,2xHD) and put them in the Nimbustor4?
Then put the AS6004U expansion with 3 HD to the Nimbustor4.
After all can I boot the Nimbustor4+AS6004U with all installed devices as normal?
Thx, Michael.

Re: Moving from AS6404T to new Nimbustor4

Posted: Mon May 27, 2019 10:49 am
by orion
Yes, I think so. Simply move all of disks on old NAS to the new NAS (in power off state). After boot up, check AppCentral to see if you need to upgrade some of apps.

Re: Moving from AS6404T to new Nimbustor4

Posted: Sun Jul 07, 2019 10:16 pm
by roterdrachen
Hi I did it. Everything works fine. ADM only updated. All apps shares ... are avaiable.