Hi,
I'm new to asustor and i'm learning
Did you hear about pi-hole ?
There are any way to make it work on asustor AS32014t ?
I'm thinking having docker running it but having an app will be more friendly-user
abdlock
-
- Posts: 917
- Joined: Fri May 15, 2015 1:56 am
Re: abdlock
This looks to be for the Raspberry Pi and not something that is designed to be run on a NAS or other computing device. I'm sure there are other apps that can also do this. Just not sure what will run on your NAS. Let me research a bit and get back to you.
- Kapitein Haak
- Posts: 333
- Joined: Tue Oct 15, 2013 2:40 pm
- Location: Stranded on the Dutch coast.
Re: abdlock
Hello Mike!
If it can run on a Pi, it can run on almost anything . They managed to get is working on a Synology which uses about the same hardware:
https://discourse.pi-hole.net/t/how-do- ... gy-nas/289
From what I understand is that it replaces the DNS server from your modem/router and will refuse to lookup domains which contain ads. This is not a computing intense task .
Best regards,
Kapitein Haak.
If it can run on a Pi, it can run on almost anything . They managed to get is working on a Synology which uses about the same hardware:
https://discourse.pi-hole.net/t/how-do- ... gy-nas/289
From what I understand is that it replaces the DNS server from your modem/router and will refuse to lookup domains which contain ads. This is not a computing intense task .
Best regards,
Kapitein Haak.
"What would the world be like without Captain Hook?"
---
"Homo sapiens non urinat in ventum" (A wise man doesn't piss into the wind), only in Amsterdam:
https://www.google.nl/maps/@52.36289,4. ... 312!8i6656
---
"Homo sapiens non urinat in ventum" (A wise man doesn't piss into the wind), only in Amsterdam:
https://www.google.nl/maps/@52.36289,4. ... 312!8i6656
-
- Posts: 4
- Joined: Thu Aug 24, 2017 1:48 am
Re: abdlock
Hi
Just been reading about this. I would like this too.....or something similar
Just been reading about this. I would like this too.....or something similar
-
- Posts: 73
- Joined: Fri Oct 18, 2013 12:56 pm
Re: abdlock
Would love to have Pi-hole run on my Asustor...
Has anyone been successful?
Has anyone been successful?
-
- Posts: 49
- Joined: Mon Sep 07, 2015 6:40 pm
Re: abdlock
+1 for an adblock solution on network
-
- Posts: 73
- Joined: Fri Oct 18, 2013 12:56 pm
Re: abdlock
Was able to get Pi-Hole to run on my Asustor (AS7004T-i5). Turned out to be easier than I had anticipated.
0) I installed App "Linux Center".
1) Once installed, I selected Debian 8 Server.
2) Took note of the IP Address and the user/pwd (which is admin/admin)
3) On my remote machine (my laptop), I ssh'ed into the IP address. ex. "ssh admin@192.168.1.91"
4) Once I entered pwd I proceeded to do an update and upgrade as shown below
4a) sudo apt-get update (you might need to re-enter the pwd --- which is admin)
4b) sudo apt-get upgrade (you might need to re-enter the pwd --- which is admin)
5) Proceeded to install curl by entering the following:
5a) sudo apt-get install curl
6) Once done, I then went ahead and installed pi-hole:
6a) curl -sSL https://install.pi-hole.net | bash
7) After the install, noticed that there were issues with Pi-Hole 3.3!
7a) https://discourse.pi-hole.net/t/pi-hole ... ecial/7159
"If you're running Raspbian Jessie and you updated Pi-hole to v3.3, you likely ran into issues. This is because the version of dnsmasq that ships with it does not support the log-queries=extra option, which we use in v3.3.
You have two options to resolve this: revert Pi-hole to a previous version or upgrade dnsmasq manually."
8) I opted to revert to previous version (3.2.1) by running following:
8a) cd /etc/.pihole
sudo git fetch --tags
sudo git checkout v3.2.1
cd /var/www/html/admin
sudo git fetch --tags
sudo git checkout v3.2.1
pihole -r
pihole checkout ftl v2.13.2
9) BOOM! It worked!!!
10) Check out the pics! Awesome!
0) I installed App "Linux Center".
1) Once installed, I selected Debian 8 Server.
2) Took note of the IP Address and the user/pwd (which is admin/admin)
3) On my remote machine (my laptop), I ssh'ed into the IP address. ex. "ssh admin@192.168.1.91"
4) Once I entered pwd I proceeded to do an update and upgrade as shown below
4a) sudo apt-get update (you might need to re-enter the pwd --- which is admin)
4b) sudo apt-get upgrade (you might need to re-enter the pwd --- which is admin)
5) Proceeded to install curl by entering the following:
5a) sudo apt-get install curl
6) Once done, I then went ahead and installed pi-hole:
6a) curl -sSL https://install.pi-hole.net | bash
7) After the install, noticed that there were issues with Pi-Hole 3.3!
7a) https://discourse.pi-hole.net/t/pi-hole ... ecial/7159
"If you're running Raspbian Jessie and you updated Pi-hole to v3.3, you likely ran into issues. This is because the version of dnsmasq that ships with it does not support the log-queries=extra option, which we use in v3.3.
You have two options to resolve this: revert Pi-hole to a previous version or upgrade dnsmasq manually."
8) I opted to revert to previous version (3.2.1) by running following:
8a) cd /etc/.pihole
sudo git fetch --tags
sudo git checkout v3.2.1
cd /var/www/html/admin
sudo git fetch --tags
sudo git checkout v3.2.1
pihole -r
pihole checkout ftl v2.13.2
9) BOOM! It worked!!!
10) Check out the pics! Awesome!
- Attachments
-
- Linux Center
- 2018-05-07 18_00_49-MediaWorkHorse - Chrome Remote Desktop.png (196.43 KiB) Viewed 11246 times
-
- Pi-Hole
- 2018-05-07 18_01_58-MediaWorkHorse - Chrome Remote Desktop.png (553.62 KiB) Viewed 11246 times
-
- Pi-Hole
- 2018-05-07 17_59_23-MediaWorkHorse - Chrome Remote Desktop.png (378.04 KiB) Viewed 11246 times
-
- Pi-Hole
- 2018-05-07 18_17_44-MediaWorkHorse - Chrome Remote Desktop.png (408.92 KiB) Viewed 11246 times
-
- Wifi Adapter setting
- 2018-05-07 18_10_06-MediaWorkHorse - Chrome Remote Desktop.png (304.25 KiB) Viewed 11246 times
-
- Router Setting
- 2018-05-07 18_02_57-MediaWorkHorse - Chrome Remote Desktop.png (430.8 KiB) Viewed 11246 times
-
- Posts: 49
- Joined: Mon Sep 07, 2015 6:40 pm
Re: abdlock
not the best solution but it works
better you work with the beta dns from pi-hole team, FTLDNS https://pi-hole.net/2018/03/24/help-us- ... more-14980 so you dont have to downgrade pi-hole to version 3.2.x
but i think asustor should implemate this or an own solution on dns base in thier adm
better you work with the beta dns from pi-hole team, FTLDNS https://pi-hole.net/2018/03/24/help-us- ... more-14980 so you dont have to downgrade pi-hole to version 3.2.x
but i think asustor should implemate this or an own solution on dns base in thier adm
-
- Posts: 73
- Joined: Fri Oct 18, 2013 12:56 pm
Re: abdlock
I agree, not the best but it does work. Was able to get FTLDNS working by following steps below:fritzboxuser wrote: better you work with the beta dns from pi-hole team, FTLDNS https://pi-hole.net/2018/03/24/help-us- ... more-14980 so you dont have to downgrade pi-hole to version 3.2.x
cd /etc/.pihole
sudo git fetch --all && sudo git checkout master
cd /etc/pihole
sudo git fetch --all && sudo git checkout master
echo "FTLDNS" | sudo tee /etc/pihole/ftlbranch
pihole checkout core FTLDNS
pihole checkout web FTLDNS
Just a reminder that when your Asustor reboots it will be assigned a new ip address for pihole... just take note of this. I don't shutdown my NAS unless there is an update so I'm fine with this.
I agree!fritzboxuser wrote: but i think asustor should implemate this or an own solution on dns base in thier adm
- Attachments
-
- PiHole
- 2018-05-08 11_35_07-MyMBPrWin10 - Chrome Remote Desktop.png (54.02 KiB) Viewed 11228 times
-
- Verified FTLDNS Installed and Running
- 2018-05-08 11_20_25-MyMBPrWin10 - Chrome Remote Desktop.png (379.74 KiB) Viewed 11228 times