Unit (6604T) will not boot anymore

[jfgratton]

Hi,

I moved during the week-end, so I cleanly shutdown the NAS, no problem there. At my new place, 4 days later, I tried to boot it:
- on the info panel it shows: starting system please wait...
- the first 2 drives blink, then stay lit, unblinking
- the other 2 drives light themselves up, unblinking green, too
- the blue (power) button is lit
- the green (disks) button blinks

and then poof, the units shutsdown, as if the power cable had been pulled.

Any idea ? I'm kind of frantic now....

[ilike2burnthing]

Fully remove and then reseat all drives and RAM, see if that resolves your issue.

Failing that, try powering on without drives.

[jfgratton]

Fully remove and then reseat all drives and RAM, see if that resolves your issue.
Failing that, try powering on without drives.

I'll start with the RAM and the 2 caches, and if does not work, I go with the 4 enclosed drives. Unseating would mean disk re-initialization, right ?

Either way, I'll keep you posted.

[jfgratton]

Fully remove and then reseat all drives and RAM, see if that resolves your issue.
Failing that, try powering on without drives.

I'll start with the RAM and the 2 caches, and if does not work, I go with the 4 enclosed drives. Unseating would mean disk re-initialization, right ?

Either way, I'll keep you posted.

Turns out it was an unseated NVMe drive.

Problem solved, thanks for the suggestion, @ilike2burnthings. Wouldn't have expected it, I moved the unit in its box, inside a stuffed box.