It is currently Thu Dec 03, 2020 4:12 pm
All times are UTC + 8 hours

[myHD 0.9.4 R.C.4] Application server for Kodi, Plex, etc. on Ubuntu 1604/1804

myHD is an isolated (namespace (mnt, IPC, PID)) Ubuntu environment to run Ubuntu application displayed as ASUSTOR Asportal / Xorg applications.

Moderator: father.mande

Re: [myHD 0.9.2 R.C.2] Application server for Kodi, Plex, etc.

Postby blopper » Thu May 09, 2019 1:47 pm

father.mande wrote:Did you restart myHD ("myHD restart" command line) after adding your folder ??? because the isolation (namespace) require to
1 define folder(s) to share
2 restart myHD to inform myHD that this folder(s) is now accessible


The "magic" restart... This was the solution.
Plus the fact the added folder is quite hidden within the folder tree you get when browsing from KODI !

All is well now.
Thanks / Merci
:-D
blopper
 
Posts: 7
Joined: Fri Oct 28, 2016 11:53 pm

Re: [myHD 0.9.2 R.C.2] Application server for Kodi, Plex, etc.

Postby father.mande » Thu May 09, 2019 3:56 pm

Hi,

don't forgot to do an Ubuntu update to get the last Kodi18 version ...
to do this choice between the two methods :
1 : use "myHD apt_upgrade_package" command in a root/your_adm_password ssh console
or
2 : (especially if you don't do it before or from long time)
open a ssh console using root / your_password
use : myHD_root to enter as root IN Ubuntu
then : apt-get update && apt-get -y dist-upgrade

The second method will solve rare case when a basic kernel tool is added or updated BUT require an exchange (configure) with the console operator (ex. console-setup)
BUT it's very rare ... I have write a new apt_upgrade_package in next release to solve this

In case using method 1 you are stopped by an interactive request ... open another ssh console, use myHD_root, kill the update / upgrade pending and restart in the console the update / upgrade or the command proposed.

Philippe.
AS5202T /AS5002T / AS202TE / AS1002T
My Blog specific to my APKG : https://blog.father-mande.ovh/
User avatar
father.mande
 
Posts: 1047
Joined: Sat Sep 12, 2015 2:55 am

Re: [myHD 0.9.2 R.C.2] Application server for Kodi, Plex, etc.

Postby DJser » Sat May 11, 2019 8:08 pm

hi
before install myHD my Asustor need an X.org 10.14.7.R19

see attached file
Attachments
45454.png
45454.png (788.13 KiB) Viewed 2203 times
DJser
 
Posts: 1
Joined: Sat May 11, 2019 8:04 pm

Re: [myHD 0.9.2 R.C.2] Application server for Kodi, Plex, etc.

Postby father.mande » Sat May 11, 2019 9:53 pm

Hi,

Yes, what is your A.D.M. release and Xorg version ??

F.Y.I. it's the minimum Xorg version : 10.14.7.R19
for ex. actually I use v 10.14.7.R35

Philippe.
N.B. I have put minimum version based on the version in A.D.M. when I start myHD the first time in an Asustor NAS
... I have only ONE NAS for dev. and normal running ... I am NOT Asustor ... so I can't test version before the version I used
... if you want to test a previous version (I can't know if it works or not) just extract the apk, change the depends request in Json file ... and re create apk to test by yourself
... but the best (and easy way) is to update A.D.M. and Xorg (if linked) to the latest stable version.
AS5202T /AS5002T / AS202TE / AS1002T
My Blog specific to my APKG : https://blog.father-mande.ovh/
User avatar
father.mande
 
Posts: 1047
Joined: Sat Sep 12, 2015 2:55 am

Re: [myHD 0.9.3 R.C.3] Application server for Kodi, Plex, etc.

Postby father.mande » Sat May 11, 2019 11:35 pm

Hi,

I am please to announce the availability of myHD 0.9.3

[Version]
0.9.3 R.C.3
... ADD support for Ubuntu 18.04 L.T.S.
... ... 18.04 is installed (be default) on a new fresh install
... ... if 16.04 is installed (after updating myHD) use the command : myHD switch_ubuntu_env 1804 (later you can switch between 16.04 and 18.04 changing value 1804 or 1604
... ... if Ubuntu 18.04 is not installed ... please wait ... the environment is downloaded, then installed next to 16.04 then myHD is restarted with new env.
... ... BEFORE you can use the pre-download script (here after) with 1804 in place of 1604 to win elapse time at install
... ALL applications can be used or reinstall ... each was regenerated for 18.04
... ... already include in Ubuntu at delivery ... require nothing if MH_xxx apkg is already installed : kodi18, Kodi17, Chrome, Netflix, Prime, etc.
... ... external : Kaku 2.0.2.1, PlexMediaPlayer 2.33.0 MUST be reinstalled (because a part of the binary was not provide by Ubuntu repository) ATTENTION to use the LAST version ONLY
... Please remember to do an upgrade of Ubuntu to get last libraries & applications

Ubuntu 18.04 L.T.S. add updated and secure new libraries, add performance (for ex. Video Acceleration (VA-API) is now version 2.1, etc.
... consider version 18.04 as the future, so 16.04 will be less supported (new applications) in the future

Download of myHD and applications (external) in first post
Philippe.
AS5202T /AS5002T / AS202TE / AS1002T
My Blog specific to my APKG : https://blog.father-mande.ovh/
User avatar
father.mande
 
Posts: 1047
Joined: Sat Sep 12, 2015 2:55 am

Re: [myHD 0.9.4 R.C.4] Application server for Kodi, Plex, etc. on Ubuntu 1604/1804

Postby father.mande » Sat May 18, 2019 10:54 pm

Hi,

I am please to provide a new update for myHD APKG v. 0.9.4

[Version]
0.9.4 R.C.4
... solve minor bugs & clean code
... ADD a tools to mount WHEN myHD is running temporary shared resources (/share/xxxx)
... ... Target is first for adding USB keys or disk plugged AFTER myHD is started (but any share can be used)
... ... This is done using SSHFS from myHD to A.D.M. SO YOU MUST have ssh and sftp configured and enable in A.D.M. part
... ... ... in Ubuntu 18.04 env. sshfs is already installed in 16.04 NOT, so you must install it
... ... ... do (after an myHD apt_upgrade_package do be at last update) : myHD_root /usr/bin/apt-get -y install sshfs
... ... New set of commands (no WebUI for the moment)
Code: Select all
myHD list_valid_folder ... list ALL valid folder able to be mounted in myHD and already selected MODIFIED TO REFLECT ACTUAL share USED
myHD list_temporary_mounted_folder ... list of temporary mounted folder
myHD mount_temporary_folder FOLDER ... mount temporary folder (/share/xxx)
myHD umount_temporary_folder FOLDER ... umount temporary folder (/share/xxx)

ATTENTION due to the fact I own only ONE NAS (for Asportal) ... I have tested this only with Ubuntu 18.04 ... but, normally, it's the same with 16.04

Philippe.
AS5202T /AS5002T / AS202TE / AS1002T
My Blog specific to my APKG : https://blog.father-mande.ovh/
User avatar
father.mande
 
Posts: 1047
Joined: Sat Sep 12, 2015 2:55 am

Re: [myHD 0.9.4 R.C.4] Application server for Kodi, Plex, etc. on Ubuntu 1604/1804

Postby father.mande » Thu Jun 13, 2019 11:14 pm

Hi,

Please, now, discuss of myHD in the new sub-forum & topics :
viewtopic.php?f=227&t=10362

Philippe.
AS5202T /AS5002T / AS202TE / AS1002T
My Blog specific to my APKG : https://blog.father-mande.ovh/
User avatar
father.mande
 
Posts: 1047
Joined: Sat Sep 12, 2015 2:55 am

Re: [myHD 0.9.4 R.C.4] Application server for Kodi, Plex, etc. on Ubuntu 1604/1804

Postby husosultan » Wed Sep 04, 2019 1:16 am

Dears,
I am doing all steps but still I don't see anywhere the .apkg file. Where is it or how to generate it.?

I am using linux and I run the search command within the all downloaded files but i don't see any apkg file. and when i try to manual install the file: myHD_0.9.4_x86-64.apk
I get always the following error:

Unable to upload. The file format is invalid for this system. (Ref. 6005)

Can you please help me ?

Thanks in advance
husosultan
 
Posts: 8
Joined: Wed Sep 04, 2019 1:05 am

Re: [myHD 0.9.4 R.C.4] Application server for Kodi, Plex, etc. on Ubuntu 1604/1804

Postby father.mande » Wed Sep 04, 2019 2:17 pm

Hi,
husosultan wrote:Dears,
Unable to upload. The file format is invalid for this system. (Ref. 6005)
Thanks in advance


APKG is only available using download link provide in this post or in myHD 1.0 post (new version)

APKG is only usable on x86_64 NAS what is your model ???
... the error is write by App. Central to inform you that the architecture of your model is NOT x86_64 Intel 64 bits)
... to verify open a terminal and do : uname -a

Philippe.
AS5202T /AS5002T / AS202TE / AS1002T
My Blog specific to my APKG : https://blog.father-mande.ovh/
User avatar
father.mande
 
Posts: 1047
Joined: Sat Sep 12, 2015 2:55 am

Re: [myHD 0.9.4 R.C.4] Application server for Kodi, Plex, etc. on Ubuntu 1604/1804

Postby husosultan » Wed Sep 04, 2019 2:52 pm

father.mande wrote:Hi,
husosultan wrote:Dears,
Unable to upload. The file format is invalid for this system. (Ref. 6005)
Thanks in advance


APKG is only available using download link provide in this post or in myHD 1.0 post (new version)

APKG is only usable on x86_64 NAS what is your model ???
... the error is write by App. Central to inform you that the architecture of your model is NOT x86_64 Intel 64 bits)
... to verify open a terminal and do : uname -a

Philippe.


Yes you are right Philippe my architecture is 32 bit:

Linux AS-302T-Huso 3.4.26 #1 SMP PREEMPT Tue Sep 3 03:34:15 CST 2019 i686 GNU/Linux

To be honest, the tutorial in the first page and all links are provided, little bit confusing me. Which app may I download now for my type of NAS server? The best question is it exist?
Afterwards can i achive to install Kodi, plex, netflix and youtube?

Thanks in advance for your help.
husosultan
 
Posts: 8
Joined: Wed Sep 04, 2019 1:05 am

PreviousNext

Return to myHD

  • You cannot post new topics in this forum
    You cannot reply to topics in this forum
    You cannot edit your posts in this forum
    You cannot delete your posts in this forum
    You cannot post attachments in this forum
  • Who is online

    Users browsing this forum: No registered users and 2 guests

cron