Since there wasn't an official subforum for the Linux Center, I post my questions here.
I run Linux Center (1.0.1.r164) on my AS6404T with ADM 3.0.3.RAI4. I have installed and enabled the Debian 8 Desktop variant.
I have two issues:
1. I would like to enable it on startup, but have not found the process on the server to be able to script it to autostart.
2. Also it stops sending HDMI after being inactive for a while. The workaround for now is to disable HDMI output in the ADM portal and re-enable it.
Any ideas how to fix my issues?
Linux center hdmi and autostart
-
- Posts: 2
- youtube meble na wymiar Warszawa
- Joined: Wed Dec 06, 2017 10:58 pm
-
- Posts: 14
- Joined: Wed Feb 07, 2018 1:25 am
Re: Linux center hdmi and autostart
hello im sorry I cant answer your questions but maybe you can say if I install Linux Cented then I cant use Asustor Portal and Kodi?
-
- Posts: 2
- Joined: Wed Dec 06, 2017 10:58 pm
Re: Linux center hdmi and autostart
AFAIK you cannot use Linux Center with HDMI output at the same time as Asustor Portal and Kodi.
-
- Posts: 82
- Joined: Tue Jun 27, 2017 1:05 pm
Re: Linux center hdmi and autostart
The stopping HDMI after being inactive for a while thing looks like some (default) power saving profile setting, there was a time when all sorts of such settings were applied everywhere and caused much unwanted or difficult to explain port behavior, but it was the trend of that time and unfortunately it stuck.
Anyways, this power saving setting should be configurable by editing some configuration file somewhere.
Just my 2c.
Anyways, this power saving setting should be configurable by editing some configuration file somewhere.
Just my 2c.
-
- Posts: 2
- Joined: Fri Apr 06, 2018 10:09 pm
Re: Linux center hdmi and autostart
Hi.
Still not any solution for autostart after reboot? Would be nice and professional...
Still not any solution for autostart after reboot? Would be nice and professional...