No Internet Connection inside Debian Desktop
-
- Posts: 2
- youtube meble na wymiar Warszawa
- Joined: Tue Dec 17, 2019 8:58 pm
No Internet Connection inside Debian Desktop
Hi! I am getting no Internet connection inside Debian Desktop after installing it in Linux Center. I can't even install packages. Already tried resetting and reinstalling everything to no avail. ADM can access the Internet whithout problems. Is there a network configuration that I am missing? Please help.
- Nazar78
- Posts: 2086
- Joined: Wed Jul 17, 2019 10:21 pm
- Location: Singapore
- Contact:
Re: No Internet Connection inside Debian Desktop
Can you see the IP to ssh when you open the Linux Center app?
If yes, try opening the browser inside Debian Destop then browse to the ADM or router IP i.e. http://192.168.1.1. Can you reach those pages? If yes most probably your DNS is wrong. Open the terminal switch to root, su -, password same as admin, then edit this file using vi or nano, /etc/resolv.conf. Ensure the nameserver is set to your router's IP or you can use Google's 8.8.8.8. In case this file doesn't exist, go ahead create one with the content "nameserver 192.168.1.1" without quotes where that IP refers to your router's or Google DNS. You can provide multiple DNS servers up to 3 e.g.:
nameserver 192.168.1.1
nameserver 8.8.8.8
nameserver 1.1.1.1
Refer to man resolv.conf for more details.
If you can't see the IP to ssh or couldn't reach any of those IPs then either the selected interface is wrong (if you have dual LAN port not in load balancing mode, check Linux Center settings ensure the correct interface is selected) or probably the network settings in Debian itself which you can try setting it manually to static IP in this file /etc/network/interfaces then restart the networking service. Refer to man interfaces for more details.
I don't know your NAS model and I'm replying from my mobile of my mind. For more details you could easily look it up from the hints provided.
If yes, try opening the browser inside Debian Destop then browse to the ADM or router IP i.e. http://192.168.1.1. Can you reach those pages? If yes most probably your DNS is wrong. Open the terminal switch to root, su -, password same as admin, then edit this file using vi or nano, /etc/resolv.conf. Ensure the nameserver is set to your router's IP or you can use Google's 8.8.8.8. In case this file doesn't exist, go ahead create one with the content "nameserver 192.168.1.1" without quotes where that IP refers to your router's or Google DNS. You can provide multiple DNS servers up to 3 e.g.:
nameserver 192.168.1.1
nameserver 8.8.8.8
nameserver 1.1.1.1
Refer to man resolv.conf for more details.
If you can't see the IP to ssh or couldn't reach any of those IPs then either the selected interface is wrong (if you have dual LAN port not in load balancing mode, check Linux Center settings ensure the correct interface is selected) or probably the network settings in Debian itself which you can try setting it manually to static IP in this file /etc/network/interfaces then restart the networking service. Refer to man interfaces for more details.
I don't know your NAS model and I'm replying from my mobile of my mind. For more details you could easily look it up from the hints provided.
AS5304T - 16GB DDR4 - ADM-OS modded on 2GB RAM
Internal:
- 4x10TB Toshiba RAID10 Ext4-Journal=Off
External 5 Bay USB3:
- 4x2TB Seagate modded RAID0 Btrfs-Compression
- 480GB Intel SSD for modded dm-cache (initramfs auto update patch) and Apps
When posting, consider checking the box "Notify me when a reply is posted" to get faster response
Internal:
- 4x10TB Toshiba RAID10 Ext4-Journal=Off
External 5 Bay USB3:
- 4x2TB Seagate modded RAID0 Btrfs-Compression
- 480GB Intel SSD for modded dm-cache (initramfs auto update patch) and Apps
When posting, consider checking the box "Notify me when a reply is posted" to get faster response
-
- Posts: 12
- Joined: Tue Sep 02, 2014 7:45 pm
Re: No Internet Connection inside Debian Desktop
Hello,
I have a same issue with a debian server installation.
I try to modify resolv.conf without succes.
Actually 192.168.1.1 is the ip of the router (livebox).
NAs and the debian have also static ips.
I don't have any idea to solve the issue.
Every help is welcomed.
I have a same issue with a debian server installation.
I try to modify resolv.conf without succes.
Actually 192.168.1.1 is the ip of the router (livebox).
NAs and the debian have also static ips.
I don't have any idea to solve the issue.
Every help is welcomed.
- father.mande
- Posts: 1819
- Joined: Sat Sep 12, 2015 2:55 am
- Location: La Rochelle (France)
Re: No Internet Connection inside Debian Desktop
Hi,
Please first check (and post here) the network config ... starting with resolv.conf is good (common problem) but the best is to start from low level
1 connect to A.D.M. terminal (ssh) with root / your_admin_password and print network info
... use ifconfig or ip (ip addr show / ip link show)
2 do the same in Debian Desktop
I don't know how Asustor manage network for Linux Center, but I suppose it's a "standard" Linux container within manager like docker or directly managed (as I do with my own Ubuntu environment in my APKG)
container support multiple network configuration (here short short short explain ) :
... host one (so share host I.P. and port table) generally no problem except port already used ...
... veth connections ... so use a private link between A.D.M. and Linux center ... so require routing and or masquerading in A.D.M. to connect container to Internet or other system on LAN
... ... debug can be done using A.D.M. tools like iptables and ip route tool
... macvlan connection ... it's an independent I.P. on same adapter (so with private I.P. and port table) able to be considered as independent server connect to box with DHCP or static
... ... debug is reduced in A.D.M. (only verify that adapter is in promiscuous mode ... require to exchange data)
... ... or external verify with mac address that a DHCP address is done by box EVEN static configured, some box also refuse to provide multiple I.P. on same Mac address ...
... direct connection ... so container use a specific Ethernet link ... not the eth use by A.D.M.
... ... common problem in this case is that A.D.M. already attach an address to this Ethernet when connected to the LAN ... so freeing it is enough to solve connect problem
If network appear correct ... use tools like traceroute to understand way used by data when you try to join some site ...
If you have not enough tools or not complete version, remember that Entware bring you lot of GNU complete tools to get more details and informations.
Philippe.
Please first check (and post here) the network config ... starting with resolv.conf is good (common problem) but the best is to start from low level
1 connect to A.D.M. terminal (ssh) with root / your_admin_password and print network info
... use ifconfig or ip (ip addr show / ip link show)
2 do the same in Debian Desktop
I don't know how Asustor manage network for Linux Center, but I suppose it's a "standard" Linux container within manager like docker or directly managed (as I do with my own Ubuntu environment in my APKG)
container support multiple network configuration (here short short short explain ) :
... host one (so share host I.P. and port table) generally no problem except port already used ...
... veth connections ... so use a private link between A.D.M. and Linux center ... so require routing and or masquerading in A.D.M. to connect container to Internet or other system on LAN
... ... debug can be done using A.D.M. tools like iptables and ip route tool
... macvlan connection ... it's an independent I.P. on same adapter (so with private I.P. and port table) able to be considered as independent server connect to box with DHCP or static
... ... debug is reduced in A.D.M. (only verify that adapter is in promiscuous mode ... require to exchange data)
... ... or external verify with mac address that a DHCP address is done by box EVEN static configured, some box also refuse to provide multiple I.P. on same Mac address ...
... direct connection ... so container use a specific Ethernet link ... not the eth use by A.D.M.
... ... common problem in this case is that A.D.M. already attach an address to this Ethernet when connected to the LAN ... so freeing it is enough to solve connect problem
If network appear correct ... use tools like traceroute to understand way used by data when you try to join some site ...
If you have not enough tools or not complete version, remember that Entware bring you lot of GNU complete tools to get more details and informations.
Philippe.
AS6602T / AS5202T /AS5002T / AS1002T / FS6706T
-
- Posts: 12
- Joined: Tue Sep 02, 2014 7:45 pm
Re: No Internet Connection inside Debian Desktop
Thank you Philippe for your answer.
I notice you maintain entware-ng among other.
Actually, i thought about linux center because i would like to install megacmd and it is not planned for datasync or the app central...
I will check if there is an up-to-date package for entware (i am not familiar with entware). If i don't have connectivity and security issues, it could be a perfect solution.
Otherwise, i will check your kind explanations.
And i will compare with my data:
NAS
DEBIAN
I notice you maintain entware-ng among other.
Actually, i thought about linux center because i would like to install megacmd and it is not planned for datasync or the app central...
I will check if there is an up-to-date package for entware (i am not familiar with entware). If i don't have connectivity and security issues, it could be a perfect solution.
Otherwise, i will check your kind explanations.
And i will compare with my data:
NAS
Code: Select all
admin@premier:/volume1/home/admin $ ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master eth0-br qlen 1000
link/ether 10:bf:48:8a:fc:b2 brd ff:ff:ff:ff:ff:ff
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq qlen 1000
link/ether 10:bf:48:8a:fd:b6 brd ff:ff:ff:ff:ff:ff
4: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/ether 02:42:b0:b2:e1:bd brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever
inet6 fe80::42:b0ff:feb2:e1bd/64 scope link
valid_lft forever preferred_lft forever
6: veth8d60152@if5: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue master docker0
link/ether a6:be:60:57:05:40 brd ff:ff:ff:ff:ff:ff
inet6 fe80::a4be:60ff:fe57:540/64 scope link
valid_lft forever preferred_lft forever
9: nat-br: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue qlen 1000
link/ether fe:36:54:3a:ee:cc brd ff:ff:ff:ff:ff:ff
inet 10.172.5.1/24 brd 10.172.5.255 scope global nat-br
valid_lft forever preferred_lft forever
inet6 fe80::c474:8cff:fe08:326b/64 scope link
valid_lft forever preferred_lft forever
10: eth0-br: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue qlen 1000
link/ether 10:bf:48:8a:fc:b2 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.60/24 brd 192.168.1.255 scope global eth0-br
valid_lft forever preferred_lft forever
inet6 fe80::12bf:48ff:fe8a:fcb2/64 scope link
valid_lft forever preferred_lft forever
12: veth5UVHAM@if11: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue master nat-br qlen 1000
link/ether fe:36:54:3a:ee:cc brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc36:54ff:fe3a:eecc/64 scope link
valid_lft forever preferred_lft forever
14: vethMCQ890@if13: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue master eth0-br qlen 1000
link/ether fe:0c:c0:a1:0f:a4 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc0c:c0ff:fea1:fa4/64 scope link
valid_lft forever preferred_lft forever
admin@premier:/volume1/home/admin $ ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master eth0-br qlen 1000
link/ether 10:bf:48:8a:fc:b2 brd ff:ff:ff:ff:ff:ff
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq qlen 1000
link/ether 10:bf:48:8a:fd:b6 brd ff:ff:ff:ff:ff:ff
4: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/ether 02:42:b0:b2:e1:bd brd ff:ff:ff:ff:ff:ff
6: veth8d60152@if5: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue master docker0
link/ether a6:be:60:57:05:40 brd ff:ff:ff:ff:ff:ff
9: nat-br: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue qlen 1000
link/ether fe:36:54:3a:ee:cc brd ff:ff:ff:ff:ff:ff
10: eth0-br: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue qlen 1000
link/ether 10:bf:48:8a:fc:b2 brd ff:ff:ff:ff:ff:ff
12: veth5UVHAM@if11: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue master nat-br qlen 1000
link/ether fe:36:54:3a:ee:cc brd ff:ff:ff:ff:ff:ff
14: vethMCQ890@if13: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue master eth0-br qlen 1000
link/ether fe:0c:c0:a1:0f:a4 brd ff:ff:ff:ff:ff:ff
admin@premier:/volume1/home/admin $
Code: Select all
admin@LXCDEBIAN10S:~$ ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
11: eth1@if12: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether b2:f4:a5:06:56:eb brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 10.172.5.2/24 brd 10.172.5.255 scope global eth1
valid_lft forever preferred_lft forever
inet6 fe80::b0f4:a5ff:fe06:56eb/64 scope link
valid_lft forever preferred_lft forever
13: eth0@if14: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether be:5d:af:96:35:0a brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 192.168.1.32/24 brd 192.168.1.255 scope global dynamic eth0
valid_lft 71824sec preferred_lft 71824sec
inet6 fe80::bc5d:afff:fe96:350a/64 scope link
valid_lft forever preferred_lft forever
admin@LXCDEBIAN10S:~$ ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
11: eth1@if12: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether b2:f4:a5:06:56:eb brd ff:ff:ff:ff:ff:ff link-netnsid 0
13: eth0@if14: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether be:5d:af:96:35:0a brd ff:ff:ff:ff:ff:ff link-netnsid 0
- father.mande
- Posts: 1819
- Joined: Sat Sep 12, 2015 2:55 am
- Location: La Rochelle (France)
Re: No Internet Connection inside Debian Desktop
Hi jbo,
I will have a look to result ... but Asustor used linux bridge and veth and perhaps direct link or macvlan link, so investigating require more command ...
I can't enter in your system to check ... so I will try, even it's not in my plan, to install Linux Center and can directly try to understand how it is build and where are the potential problem similar to your own.
So please wait (I have to stop some dev.), or wait for other support here or ... ask Asustor support.
In second hand ... Entware is now the ONLY version to used (Entware-ng is an oldest up to all platform use the same structure as now with Entware today x86(32 bits), x86_64, armhf (arm for Asustor), arm64 (arm 64 bits))
in Entware you can get megacmd tools (in the 1900 package proposed)
Entware is a package manager for package coming from OpenWRT for a large number of platform
... after install ... all library (updated including basic one like libc ... 2.27 compare to 2.22 for A.D.M.) all program, data, config file are in /opt in A.D.M. ... all program run as native mode inside A.D.M. without containers
... by default all user / group / password and network are the same and ALL A.D.M. files & folder are accessible as any A.D.M. command tools.
... after install (and reconnect terminal to get correct PATH (automatic) you have one command opkg (openwrt package manager)
... init script are in /opt/etc/init.d and use standard init file name style Snnxxxxxx ... (nn is the order)
... config file are generally in /opt/etc
Philippe.
I will have a look to result ... but Asustor used linux bridge and veth and perhaps direct link or macvlan link, so investigating require more command ...
I can't enter in your system to check ... so I will try, even it's not in my plan, to install Linux Center and can directly try to understand how it is build and where are the potential problem similar to your own.
So please wait (I have to stop some dev.), or wait for other support here or ... ask Asustor support.
In second hand ... Entware is now the ONLY version to used (Entware-ng is an oldest up to all platform use the same structure as now with Entware today x86(32 bits), x86_64, armhf (arm for Asustor), arm64 (arm 64 bits))
in Entware you can get megacmd tools (in the 1900 package proposed)
Code: Select all
opkg list | grep mega
libmega - 3.7.0-1 - MEGA SDK - Client Access Engine (library).
megacmd - 1.2.0-1 - MEGAcmd provides non UI access to MEGA services. It intends to offer all the functionality with your MEGA account via commands.
meganz-sdk - 3.7.0-1 - MEGA SDK - Client Access Engine (utility).
... after install ... all library (updated including basic one like libc ... 2.27 compare to 2.22 for A.D.M.) all program, data, config file are in /opt in A.D.M. ... all program run as native mode inside A.D.M. without containers
... by default all user / group / password and network are the same and ALL A.D.M. files & folder are accessible as any A.D.M. command tools.
... after install (and reconnect terminal to get correct PATH (automatic) you have one command opkg (openwrt package manager)
... init script are in /opt/etc/init.d and use standard init file name style Snnxxxxxx ... (nn is the order)
... config file are generally in /opt/etc
Philippe.
AS6602T / AS5202T /AS5002T / AS1002T / FS6706T
- Nazar78
- Posts: 2086
- Joined: Wed Jul 17, 2019 10:21 pm
- Location: Singapore
- Contact:
Re: No Internet Connection inside Debian Desktop
The network should work right out of the box when you first launch the LXC. And your interfaces seems looks ok too. Which Debian server you did install? 10 Buster?jbo wrote:Hello,
I have a same issue with a debian server installation.
I try to modify resolv.conf without succes.
Actually 192.168.1.1 is the ip of the router (livebox).
NAs and the debian have also static ips.
I don't have any idea to solve the issue.
Every help is welcomed.
Can you reach ADM from Debian using IP only? Try SSH from Debian to the NAS:
Code: Select all
ssh -oConnectTimeout=1 192.168.1.60
Code: Select all
ssh -oConnectTimeout=1 10.172.5.1
Please provide the following from Debian:
Code: Select all
ip route
Code: Select all
sudo /sbin/route delete default gw 10.172.5.1 dev eth1
sudo /sbin/route add default gw 192.168.1.1 dev eth0
AS5304T - 16GB DDR4 - ADM-OS modded on 2GB RAM
Internal:
- 4x10TB Toshiba RAID10 Ext4-Journal=Off
External 5 Bay USB3:
- 4x2TB Seagate modded RAID0 Btrfs-Compression
- 480GB Intel SSD for modded dm-cache (initramfs auto update patch) and Apps
When posting, consider checking the box "Notify me when a reply is posted" to get faster response
Internal:
- 4x10TB Toshiba RAID10 Ext4-Journal=Off
External 5 Bay USB3:
- 4x2TB Seagate modded RAID0 Btrfs-Compression
- 480GB Intel SSD for modded dm-cache (initramfs auto update patch) and Apps
When posting, consider checking the box "Notify me when a reply is posted" to get faster response
- father.mande
- Posts: 1819
- Joined: Sat Sep 12, 2015 2:55 am
- Location: La Rochelle (France)
Re: No Internet Connection inside Debian Desktop
Hi,
Just install L.C. to have a look
1 sorry, my error, it's a tiers provider NOT Asustor ... so support is not done by Asustor
2 install debian10-desktop
... test using default software install ... no problem (veth - veth - masquerade in A.D.M.)
... test changing default gateway to use LAN I.P. ... no problem
so I can't reproduce your problem ... ???
I suggest to try the change gateway (as Nazar78 also have proposed) ... but no reason in the delivery to have to do it ...
I have stopped my test ... but in some days I will analyse totally the network and the low level bridge for getting a LAN I.P.
Philippe.
Just install L.C. to have a look
1 sorry, my error, it's a tiers provider NOT Asustor ... so support is not done by Asustor
2 install debian10-desktop
... test using default software install ... no problem (veth - veth - masquerade in A.D.M.)
... test changing default gateway to use LAN I.P. ... no problem
so I can't reproduce your problem ... ???
I suggest to try the change gateway (as Nazar78 also have proposed) ... but no reason in the delivery to have to do it ...
I have stopped my test ... but in some days I will analyse totally the network and the low level bridge for getting a LAN I.P.
Philippe.
AS6602T / AS5202T /AS5002T / AS1002T / FS6706T
-
- Posts: 12
- Joined: Tue Sep 02, 2014 7:45 pm
Re: No Internet Connection inside Debian Desktop
Thank you father.mande and nazar78 for your answers.
Here are the return:
I try the change gateway as Nazar78 suggested.
It seems to solve the issue.
As i don't know if it will be permanent when the nas will reboot, i would like to understand exactly what the problem was...
Above all, thank you for the help.
jB
Ps: @Philippe, i will have a look at entware.
Here are the return:
Code: Select all
admin@LXCDEBIAN10S:~$ ssh -oConnectTimeout=1 192.168.1.60
Could not create directory '/home/admin/.ssh'.
The authenticity of host '[192.168.1.60]:22 ([192.168.1.60]:22)' can't be established.
ECDSA key fingerprint is SHA256:qaKe9D/iaGOCD+VJ1xFBou82GIfpTz9F2fA+LM9Law8.
Are you sure you want to continue connecting (yes/no)? yes
Failed to add the host to the list of known hosts (/home/admin/.ssh/known_hosts).
Password:
admin@premier:/volume1/home/admin $ exit
Connection to 192.168.1.60 closed.
admin@LXCDEBIAN10S:~$ ssh -oConnectTimeout=1 10.172.5.1
ssh: connect to host 10.172.5.1 port 22: Connection refused
admin@LXCDEBIAN10S:~$ ip route
default via 10.172.5.1 dev eth1
10.172.5.0/24 dev eth1 proto kernel scope link src 10.172.5.2
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.32
admin@LXCDEBIAN10S:~$
It seems to solve the issue.
As i don't know if it will be permanent when the nas will reboot, i would like to understand exactly what the problem was...
Above all, thank you for the help.
jB
Ps: @Philippe, i will have a look at entware.
- Nazar78
- Posts: 2086
- Joined: Wed Jul 17, 2019 10:21 pm
- Location: Singapore
- Contact:
Re: No Internet Connection inside Debian Desktop
It's temporary and will be lost once the container restarts, just like any real OS.jbo wrote:As i don't know if it will be permanent when the nas will reboot, i would like to understand exactly what the problem was...
You can try add it in the Debian's /etc/network/interfaces, add right after the "iface eth0 inet dhcp":
Code: Select all
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
post-up route del default gw 10.172.5.1;\
route add default gw 192.168.1.1 metric 0;\
route add default gw 10.172.5.1 metric 1
source /etc/network/interfaces.d/*.cfg
As for the root cause I'm not sure exactly as it works fine on mine, need more debugging.
AS5304T - 16GB DDR4 - ADM-OS modded on 2GB RAM
Internal:
- 4x10TB Toshiba RAID10 Ext4-Journal=Off
External 5 Bay USB3:
- 4x2TB Seagate modded RAID0 Btrfs-Compression
- 480GB Intel SSD for modded dm-cache (initramfs auto update patch) and Apps
When posting, consider checking the box "Notify me when a reply is posted" to get faster response
Internal:
- 4x10TB Toshiba RAID10 Ext4-Journal=Off
External 5 Bay USB3:
- 4x2TB Seagate modded RAID0 Btrfs-Compression
- 480GB Intel SSD for modded dm-cache (initramfs auto update patch) and Apps
When posting, consider checking the box "Notify me when a reply is posted" to get faster response