Hi,
In log I don't see any trace of :
Pass-through enable in PMP
EDID extended information on sound capabilities in Xorg ??? (EDID is not only for screen resolution and frequency)
Please verify PMP configuration (audio configuration help in Plex.tv site is complete)
https://support.plex.tv/articles/212072 ... ia-player/
verify also HOW your sound cards are view by the Linux kernel (ADM)
open a terminal root / your password
cd /proc/asound
... here some folder named card0 (or multiple ... cardn)
... ... in asound you have lot of information on hardware (real)
... in card0 search for files like eld\#2.x ... it's the extended EDID receive by ADM from your screen / tv / receiver
ex. mine it's a simple screen so only stereo look like
Code: Select all
root@AS5002TaPhil:/proc/asound/card0 # cat eld\#2.0
monitor_present 1
eld_valid 1
monitor_name BenQ GL2250H
connection_type HDMI
eld_version [0x2] CEA-861D or below
edid_version [0x3] CEA-861-B, C or D
manufacture_id 0xd109
product_id 0x78a1
port_id 0x0
support_hdcp 0
support_ai 0
audio_sync_delay 0
speakers [0x1] FL/FR
sad_count 1
sad0_coding_type [0x1] LPCM
sad0_channels 2
sad0_rates [0xe0] 32000 44100 48000
sad0_bits [0xe0000] 16 20 24
root@AS5002TaPhil:/proc/asound/card0 #
Normally for you ... you must see your receiver name and the correct channel and speakers supported ...
If all seem correct ... and nothing change ... don't hesitate to post in Plex Media Player forum with your receiver the plexmediaplayer.conf, the plexmediaplayer.log and the eld file for ex.
... even officially no Linux version is provide ... the code of PMP2 use for APKG is 100% without modification the code proposed by Plex.tv team
Philippe.