Bonjour,
Pendant l'installation, les seules instructions utilisées sont des commandes "opkg" de entware pour installer des outils indispensable.fpaquin wrote:Salut Philippe,
Je t'écris en francais c'est plus facile pour moi. Que veux-tu dire par vérifier si ''Entware is enable'' ?
Si entware n'est pas Enable ces opérations ne peuvent s'effectuer et peut-être engendre la terminaison à 30% de l'installation.
La vérification se fait en allant dans AppCentral ou en lançant la commande apkg --info-installed entware ... regardez le champs "Enable" qui doit être à "Yes"
During installation, the only instructions used are "opkg" commands from entware to install essential tools.
If the entware is not Enable these operations cannot be carried out and may result in the installation being terminated at 30%.
The verification is done by going to AppCentral or by running the command apkg --info-installed entware ... look at the "Enable" field which must be "Yes"
Philippe.
NB write in French but also in English or use Google translate to inform others users interested by your problem.