Page 1 of 3
Upgrade to ADM 2.6 Broke Sonarr
Posted: Thu Jun 02, 2016 5:05 pm
by gwild0r
Just upgraded to ADM 2.6 and now sonarr is broken.
I go to click on System to get a Status. And there are dots moving back and forth on disk space like something is about to load, same with logs.
Then after sometime sonarr just stops working.
- sonarr1.PNG (15.9 KiB) Viewed 13452 times
Also tried deleting the app, and then reinstalling from app central. Same problem.
Re: Upgrade to ADM 2.6 Broke Sonarr
Posted: Thu Jun 02, 2016 5:47 pm
by lanimul
Image is cropped, but are u able to click on the Updates tab?
I haven't had problems with Sonarr since taking the ADM 2.6.1.RFH1 on 602t update. My Sonarr version is 2.0.0.4146 - May 11 2016.
Sent from my SM-P900 using Tapatalk
Re: Upgrade to ADM 2.6 Broke Sonarr
Posted: Thu Jun 02, 2016 9:05 pm
by itdaboyz
Same here no problem on 2.6 with Sonarr.
Re: Upgrade to ADM 2.6 Broke Sonarr
Posted: Fri Jun 03, 2016 2:49 am
by gwild0r
I click updates Tab and i just get the dots moving back and forth.
Which version of Mono are you guys using? the version of sonarr i was using before I deleted I think was 2.0.0.4146. But since deleteing the app and re-installing it this morning sonarr is 2.0.0.3somethingsomething.
Also on AS 202TE.. with the intel atom processor.
Re: Upgrade to ADM 2.6 Broke Sonarr
Posted: Fri Jun 03, 2016 7:26 am
by lanimul
Mono 4.2.2.r1
Sent from my SM-P900 using Tapatalk
Re: Upgrade to ADM 2.6 Broke Sonarr
Posted: Fri Jun 03, 2016 9:10 pm
by gwild0r
yea, that's the same version i'm using..
Re: Upgrade to ADM 2.6 Broke Sonarr
Posted: Tue Jun 07, 2016 7:48 am
by jumpjet
Same here on the AS-302T ADM 2.6.1.R5H1 with Mono 4.2.2.r1
Originally I had a later version updated via Sonarr, and the Asustor version update was older, so I ignored it.
Since the ADM update it's not been working, and trying to log in to the web interface just leaves me with a blank screen "connecting"
I've stopped and started it a few times and rebooted the box to no avail. I backed up the config and database via SSH, and un-installed then reinstalled the app. The web interface still doesn't work prior to and after re-uploading the config file and database.
I've also ensured that the sonarr ports are open on the box's firewall
Now I am stuck and don't know what to do ..... I've hit my Linus system knowledge limit
Re: Upgrade to ADM 2.6 Broke Sonarr
Posted: Tue Jun 07, 2016 1:21 pm
by orion
Mine is working fine: ADM 2.6.1.R5H1, Sonarr 2.0.0.3530, Mono 4.2.2.r1.
And, after updated to the latest one (2.0.0.4146), it is still working fine.
Re: Upgrade to ADM 2.6 Broke Sonarr
Posted: Tue Jun 07, 2016 3:13 pm
by itdaboyz
Try loading Sonarr via SSH to have the output and see if an error is shown at loading.
Re: Upgrade to ADM 2.6 Broke Sonarr
Posted: Tue Jun 07, 2016 7:51 pm
by jumpjet
itdaboyz wrote:Try loading Sonarr via SSH to have the output and see if an error is shown at loading.
I'm afraid I don't know how to do that, my Linux knowledge is poor.
I can use Bitvise SSH client to log onto the box. I use the Bitvise SFTP client to backup configs and stuff like that, and there is a 'xterm' command window open at the same time.
I have just re-installed again with the same results, but I didn't upload the previous database or config, however there was this entry at the bottom of the nzbdrone.log (sonarr/config/logs) :-
Code: Select all
16-6-7 12:39:20.7|Fatal|ConsoleApp|Address already in use. This can happen if another instance of Sonarr is already running another application is using the same port (default: 8989) or the user has insufficient permissions
Any ideas?
As far as I am aware there is nothing else using the same port. I use default ports for all my apps. As for permissions, I know how to set them and what each permission does, but I don't know what the correct permissions are for this application and the app's file/folders
Cheers