Page 1 of 1

Hauppage SoloHD Not loading

PostPosted: Wed Jun 13, 2018 1:05 pm
by adrenalinenz
Hi,

Just installed the latest Media-pack which mentioned it had fixed support for SoloHD DVB-T tuners.

I restarted my NAS in the hope it'd detect the USB tuner, unfortunately it's not.

Anyone have an idea how to get it to load?

Code: Select all
admin@NAS1:/ $ usbip list -l
Local USB devices
=================
 - busid 1-2 (2040:8268)
   Hauppauge : unknown product (2040:8268)
         1-2:1.0 -> unknown



Code: Select all
admin@NAS1:/ $ dmesg | grep usb
[    1.096717] usbcore: registered new interface driver usbfs
[    1.102228] usbcore: registered new interface driver hub
[    1.107566] usbcore: registered new device driver usb
[    5.105004] usbcore: registered new interface driver catc
[    5.162071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.168904] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.176147] usb usb1: Product: xHCI Host Controller
[    5.181051] usb usb1: Manufacturer: Linux 4.4.24 xhci-hcd
[    5.186475] usb usb1: SerialNumber: 0000:00:15.0
[    5.215118] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    5.221943] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.229189] usb usb2: Product: xHCI Host Controller
[    5.234093] usb usb2: Manufacturer: Linux 4.4.24 xhci-hcd
[    5.239520] usb usb2: SerialNumber: 0000:00:15.0
[    5.254391] usbcore: registered new interface driver cdc_acm
[    5.268135] usbcore: registered new interface driver usblp
[    5.273682] usbcore: registered new interface driver usb-storage
[    5.279756] usbcore: registered new interface driver usbserial
[    5.285634] usbcore: registered new interface driver ftdi_sio
[    5.291416] usbserial: USB Serial support registered for FTDI USB Serial Device
[    5.559403] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    5.731549] usb 1-2: New USB device found, idVendor=2040, idProduct=8268
[    5.738288] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    5.745444] usb 1-2: Product: soloHD
[    5.749039] usb 1-2: Manufacturer: HCW
[    5.752809] usb 1-2: SerialNumber: 0013954119
[    6.618131] usbcore: registered new interface driver usbhid
[    6.623721] usbhid: USB HID core driver
[   37.856210] usbip_core: USB/IP Core v1.0.0
[   37.874621] usbip-host 1-2:1.0: 1-2 is not in match_busid table... skip!
[   37.881802] usbcore: registered new interface driver usbip-host
[   37.888046] usbip_host: USB/IP Host Driver v1.0.0
[   40.700659] usbcore: registered new interface driver btusb
[   48.021431] usbcore: registered new interface driver snd-usb-audio


Any further help appreciated.