Hello: I have an AS5002t NAS. that is connected to my Linksys router. I can backup one of my wireless computers using the standard admin ID and password.
I can also backup my secondary desktop using the same signin. I cannot however use the backup program for my main desktop computer.
The reject message says the ID/password is not recognized...try again. I have tried every possible combination but cannot come up with a signin.
Some help please. tmansk
password unknown
-
- Posts: 8
- youtube meble na wymiar Warszawa
- Joined: Thu Jan 21, 2016 8:56 am
- orion
- Posts: 3485
- Joined: Wed May 29, 2013 11:09 am
Re: password unknown
I guess your desktop computer should connect to NAS with guest account. Windows can only allow one user connected to a remote server at a given moment. You can check it by a command prompt. Execute the command "net use". You can check if you connected to NAS before. You can remove the connection by command "net use /d <drive letter>:" Then, use command to specify user name: "net use * \\<nas_ip>\<share_name> /user:<user_name>".
I think you can disable guest account under ADM. You won't get confused by this way.
I think you can disable guest account under ADM. You won't get confused by this way.
-
- Posts: 8
- Joined: Thu Jan 21, 2016 8:56 am
Re: password unknown
what I do not understand is that I can just sign into the NAS without a concern, then it tells me that I need a new password to sign in. that is what I need (I am a plug -n-play user from way back). It does not tell me that I have overloaded some system I don't know about. what is the password?. I do get confused with command functions. I am thinking that this whole system of NAS backup is not for me. It is not mature enough to be plug-n-play as it tells me to use the "correct password"
-
- Posts: 8
- Joined: Thu Jan 21, 2016 8:56 am
Re: password unknown
to continue, the instructions with the backup program do not stay within the program it self to get it to work
- orion
- Posts: 3485
- Joined: Wed May 29, 2013 11:09 am
Re: password unknown
Ok, I think you can try the following steps:
- Go to NAS web page: ADM web page -> Access Control -> Local Users -> select "guest" -> Disable this account.
- Reboot your NAS.
- Try Backup Plan again on your devices.