I get this messege when i try to remote connect to the system, can some one help me to solve this!?
Messege: Disconnect reason: E: TCP: SECURITY_ERROR Error #2048
Disconnect reason: E: TCP: SECURITY_ERROR Error #2048
-
- Posts: 9
- youtube meble na wymiar Warszawa
- Joined: Thu Jun 19, 2014 11:53 pm
-
- Posts: 10
- Joined: Fri Mar 27, 2020 1:21 am
Re: Disconnect reason: E: TCP: SECURITY_ERROR Error #2048
I had the same problem. You need to install your VM as you would any other VM then before you run, right click on the VM go to Settings, then go to Display on the left, under display click on the Remote Display tab, Change Net Address: (to your servers ip address) Save and exit. Now start your VM and click on console it should have your servers ipaddress and connect with out any problems.
So my address for my adm was 192.168.1.26 that I use to log into the asustor, that is the address. if you change it when the VM is running, it will not register until you shut it off, do the changes, and restart the VM.
So my address for my adm was 192.168.1.26 that I use to log into the asustor, that is the address. if you change it when the VM is running, it will not register until you shut it off, do the changes, and restart the VM.