Re: AS6104T MyArchive random unmount
Posted: Fri Feb 08, 2019 12:31 am
Hello,
I have embarrassing / annoying news.
I only migrated MyArchive from EXT4 to NTFS.
Now I have:
Disk1 - System (EXT)
Disk2 - MyArchive 3 (NTFS)
Disk3 - MyArchive 2 (NTFS)
Disk4 - MyArchive 1 (NTFS)
Where is the news: now on reboot are two volumes that are not mounted: MyArchive 3 and MyArchive 1 (I attach a photo).
I ran a dmesg:
Always with the E-Sata disk (NTFS) connected.
I saw a new firmware update available; Is it wise to update? What do you think?
Also I want to do other tests like disconnect the E-Sata disk and try the disk via USB 3.0 box to understand if the problem can be the disk or the box.
And then I have a factory reset (no, I have not tried with the original ram).
I have embarrassing / annoying news.
I only migrated MyArchive from EXT4 to NTFS.
Now I have:
Disk1 - System (EXT)
Disk2 - MyArchive 3 (NTFS)
Disk3 - MyArchive 2 (NTFS)
Disk4 - MyArchive 1 (NTFS)
Where is the news: now on reboot are two volumes that are not mounted: MyArchive 3 and MyArchive 1 (I attach a photo).
I ran a dmesg:
Code: Select all
[ 7.558972] 8021q: 802.1Q VLAN Support v1.8
[ 7.563209] Key type dns_resolver registered
[ 7.567971] microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x351
[ 7.573952] microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x351
[ 7.579964] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 7.588795] SSE version of gcm_enc/dec engaged.
[ 7.591605] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 7.601159] registered taskstats version 1
[ 7.606386] Btrfs loaded, debug=on
[ 7.610697] Magic number: 7:163:177
[ 7.614563] acpi device:0d: hash matches
[ 7.618590] console [netcon0] enabled
[ 7.622269] netconsole: network logging started
[ 7.626873] rtc_cmos 00:04: setting system clock to 2019-02-04 12:10:40 UTC (1549282240)
[ 7.635779] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 7.641799] EDD information not available.
[ 7.646038] PM: Hibernation image not present or could not be loaded.
[ 7.649156] Freeing unused kernel memory: 888K (ffffffff81ca6000 - ffffffff81d84000)
[ 7.657203] Write protecting the kernel read-only data: 12288k
[ 7.664671] Freeing unused kernel memory: 1516K (ffff880001685000 - ffff880001800000)
[ 7.682270] Freeing unused kernel memory: 932K (ffff880001b17000 - ffff880001c00000)
[ 7.726300] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001
[ 7.733640] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7.741450] usb 1-1: Product: CSR8510 A10
[ 7.901626] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[ 8.085318] usb 1-2: New USB device found, idVendor=051d, idProduct=0002
[ 8.092351] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 8.099772] usb 1-2: Product: Back-UPS XS 950U FW:925.T2 .I USB FW:T2
[ 8.106747] usb 1-2: Manufacturer: American Power Conversion
[ 8.112623] usb 1-2: SerialNumber: 4B1827P00736
[ 8.118123] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 8.450158] hid-generic 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 950U FW:925.T2 .I USB FW:T2 ] on usb-0000:00:14.0-2/input0
[ 8.621618] usb 1-3: new high-speed USB device number 4 using xhci_hcd
[ 8.794143] usb 1-3: New USB device found, idVendor=125f, idProduct=601a
[ 8.801100] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.808513] usb 1-3: Product: IUM01-512MFHL
[ 8.812845] usb 1-3: Manufacturer: ADATA
[ 8.816891] usb 1-3: SerialNumber: 120825741539000430
[ 8.822377] usb 1-3: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 8.831607] usb 1-3: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 8.843731] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 8.865024] scsi host6: usb-storage 1-3:1.0
[ 9.022658] usb 1-4: new high-speed USB device number 5 using xhci_hcd
[ 9.216844] usb 1-4: New USB device found, idVendor=1a40, idProduct=0101
[ 9.224213] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9.232017] usb 1-4: Product: USB 2.0 Hub [MTT]
[ 9.237556] hub 1-4:1.0: USB hub found
[ 9.241686] hub 1-4:1.0: 4 ports detected
[ 9.873469] scsi 6:0:0:0: Direct-Access ADATA IUM01-512MFHL 0100 PQ: 0 ANSI: 0 CCS
[ 9.883422] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 9.889802] sd 6:0:0:0: [sde] 1007616 512-byte logical blocks: (516 MB/492 MiB)
[ 9.899678] sd 6:0:0:0: [sde] Write Protect is off
[ 9.904711] sd 6:0:0:0: [sde] Mode Sense: 43 00 00 00
[ 9.909301] sd 6:0:0:0: [sde] No Caching mode page found
[ 9.914876] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 9.947696] sde: sde1 sde2 sde3
[ 10.255067] sd 6:0:0:0: [sde] Attached SCSI removable disk
[ 10.415493] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null)
[ 10.436377] nasmand (771): /proc/888/oom_adj is deprecated, please use /proc/888/oom_score_adj instead.
[ 10.567535] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.663214] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 10.758721] random: dd: uninitialized urandom read (512 bytes read, 115 bits of entropy available)
[ 10.826919] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null)
[ 10.889507] random: nonblocking pool is initialized
[ 11.386687] md: md0 stopped.
[ 11.392854] md: bind<sda2>
[ 11.403244] md/raid1:md0: active with 1 out of 4 mirrors
[ 11.408813] asustor add disk dev md0
[ 11.408867] md0: detected capacity change from 0 to 2145386496
[ 11.534290] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 11.581774] EXT4-fs (md0): re-mounted. Opts: (null)
[ 11.792274] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
[ 11.819606] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null)
[ 14.269328] tg3 0000:03:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 14.276565] tg3 0000:03:00.0 eth0: Flow control is on for TX and on for RX
[ 14.284077] tg3 0000:03:00.0 eth0: EEE is enabled
[ 14.289130] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.675534] md: md126 stopped.
[ 19.701610] md: bind<sda3>
[ 19.720379] md/raid1:md126: active with 1 out of 4 mirrors
[ 19.726406] asustor add disk dev md126
[ 19.726460] md126: detected capacity change from 0 to 2145386496
[ 19.799405] Adding 2095100k swap on /dev/md126. Priority:-1 extents:1 across:2095100k
[ 19.829416] md: md1 stopped.
[ 19.840000] md: bind<sda4>
[ 19.874842] md/raid1:md1: active with 1 out of 1 mirrors
[ 19.880679] asustor add disk dev md1
[ 19.880756] md1: detected capacity change from 0 to 995506520064
[ 20.166452] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv1
[ 21.169648] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 27.494081] jnl: driver (UFSD_HEAD lke_9.5.7_b449) loaded at ffffffffa002f000
[ 27.504705] ufsd: module license 'Commercial product' taints kernel.
[ 27.511911] Disabling lock debugging due to kernel taint
[ 27.521778] ufsd: driver (UFSD_HEAD lke_9.5.7_b449, acl, ioctl, sd2(5), tr, car) loaded at ffffffffa003e000
[ 27.521778] NTFSJ support included
[ 27.521778] Hfs+J support included
[ 27.521778] Build_for__Asustor_AS-6xx_k4.1.0_2016-02-01_lke_9.5.7_b449
[ 27.546249] ufsd: PAGE_SIZE=4K, THREAD_SIZE=16k
[ 27.553657] ufsd: Kernel .config hash: original 0x9d41e7bd, current matched.
[ 28.077287] ufsd: "mount" (sdc1): is mounted as NTFS at 2019-02-04 12:11:00
[ 28.772229] ufsd: "mount" (sdd1): is mounted as NTFS at 2019-02-04 12:11:01
[ 28.958483] ufsd: "mount" (sdb1): is mounted as NTFS at 2019-02-04 12:11:01
[ 42.805422] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 58.758526] sys_stat: module is from the staging directory, the quality is unknown, you have been warned.
[ 58.947829] [drm] Initialized drm 1.1.0 20060810
[ 59.109185] [drm] Memory usable by graphics device = 2048M
[ 59.115225] [drm] Replacing VGA console driver
[ 59.120357] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 59.127918] [drm] Driver supports precise vblank timestamp query.
[ 59.176442] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 59.323384] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 59.472409] acpi device:2b: registered as cooling_device3
[ 59.534427] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 59.638533] i915 0000:00:02.0: No connectors reported connected with modes
[ 59.645753] [drm] Cannot find any crtc or sizes - going 1024x768
[ 59.658188] fbcon: inteldrmfb (fb0) is primary device
[ 59.658391] Console: switching to colour frame buffer device 128x48
[ 59.711450] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 59.734148] intelfb: intelfb_init
[ 59.734153] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
[ 59.746226] intelfb: Version 0.9.6
[ 60.034542] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 60.071095] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[ 60.082953] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 60.091621] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 60.099887] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 60.106864] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 60.113645] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 60.119531] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 60.126147] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 60.132915] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 60.139184] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c
[ 60.256273] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 60.313749] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 60.385053] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 60.462103] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 60.557493] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 60.589565] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 60.632154] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 60.686005] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 60.746090] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 60.804099] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 62.945691] iscsi-scst: ***WARNING***: CONFIG_TCP_ZERO_COPY_TRANSFER_COMPLETION_NOTIFICATION not enabled in your kernel. ISCSI-SCST will be working with not the best performance. Refer README file for details.
[ 63.271302] Loading iSCSI transport class v2.0-870.
[ 63.413552] iscsi: registered transport (tcp)
[ 68.983826] usbip_core: USB/IP Core v1.0.0
[ 69.005149] usbip-host 1-1:1.0: 1-1 is not in match_busid table... skip!
[ 69.012161] usbip-host 1-1:1.1: 1-1 is not in match_busid table... skip!
[ 69.019248] usbcore: registered new interface driver usbip-host
[ 69.025448] usbip_host: USB/IP Host Driver v1.0.0
[ 72.698759] cryptodev: driver 1.8 loaded.
[ 75.984594] Bluetooth: Core ver 2.21
[ 75.988364] NET: Registered protocol family 31
[ 75.993037] Bluetooth: HCI device and connection manager initialized
[ 75.999649] Bluetooth: HCI socket layer initialized
[ 76.004809] Bluetooth: L2CAP socket layer initialized
[ 76.010041] Bluetooth: SCO socket layer initialized
[ 76.086566] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 76.092482] Bluetooth: BNEP filters: protocol multicast
[ 76.098192] Bluetooth: BNEP socket layer initialized
[ 76.124423] Bluetooth: RFCOMM TTY layer initialized
[ 76.129806] Bluetooth: RFCOMM socket layer initialized
[ 76.135433] Bluetooth: RFCOMM ver 1.11
[ 76.151996] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 76.158548] Bluetooth: HIDP socket layer initialized
[ 76.329891] Bluetooth: HCI UART driver ver 2.3
[ 76.334910] Bluetooth: HCI UART protocol H4 registered
[ 76.340565] Bluetooth: HCI UART protocol BCSP registered
[ 76.346391] Bluetooth: HCI UART protocol LL registered
[ 76.352001] Bluetooth: HCI UART protocol ATH3K registered
[ 76.357922] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 76.364849] Bluetooth: HCI UART protocol Intel registered
[ 76.370788] Bluetooth: HCI UART protocol BCM registered
[ 76.376490] Bluetooth: HCI UART protocol QCA registered
[ 76.447135] usbcore: registered new interface driver btusb
[ 77.029805] Bluetooth: Unable to create CMAC crypto context
[ 93.646490] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 93.955025] usbcore: registered new interface driver snd-usb-audio
>[ 183.492554] udevd[6063]: starting version 3.2
>[ 183.520561] udevd[6064]: starting eudev-3.2
root@NAS-SERVER:/volume1/.@root #
I saw a new firmware update available; Is it wise to update? What do you think?
Also I want to do other tests like disconnect the E-Sata disk and try the disk via USB 3.0 box to understand if the problem can be the disk or the box.
And then I have a factory reset (no, I have not tried with the original ram).