Page 1 of 1

Volume gone after ADM 3.3.0 update on AS6104T

Posted: Fri May 24, 2019 1:32 pm
by maxbraketorque
All previous updates had gone smoothly, but after the 3.3.0 update, the Volume page now says, "Error, System Failure", and my volume is gone. And there is no option to repair or create a new one. The drive page shows all four drives as healthy. Any thoughts on how to bring back my lost volume?

Re: Volume gone after ADM 3.3.0 update on AS6104T

Posted: Mon May 27, 2019 10:46 am
by orion
Mine is just fine after upgraded. You'd better to send a support request to asustor directly.

Re: Volume gone after ADM 3.3.0 update on AS6104T

Posted: Mon May 27, 2019 6:24 pm
by cyberbob32
Hello, I had a problem as well. Sure, I did not have any important data so I reset to the factory settings and re-created Volume. But I'm curious how to solve this proble

Re: Volume gone after ADM 3.3.0 update on AS6104T

Posted: Mon May 27, 2019 10:05 pm
by maxbraketorque
orion wrote:Mine is just fine after upgraded. You'd better to send a support request to asustor directly.
Yep, I sent in US and TW support requests. No response yet, but I sent it on Thursday evening.

About the only thing I can think of that might be considered off-normal for my setup is that I migrated from a 2-disk 6102T to a 4-disk 6104T in January. However, the migration went fine, and at least one pre-3.3.0 update was installed without issue.

Re: Volume gone after ADM 3.3.0 update on AS6104T

Posted: Mon Jun 03, 2019 12:24 am
by cyberbob32
Hello, how the problem was solved by support

Re: Volume gone after ADM 3.3.0 update on AS6104T

Posted: Tue Jun 04, 2019 5:56 am
by maxbraketorque
cyberbob32 wrote:Hello, how the problem was solved by support
I did not resolve. However, it appears that one person was able to resolve, I think with help from ASUSTOR Support:

viewtopic.php?f=49&t=10117&p=32807