Hi All,
I see that mdadm is being used behind the scenes to manage the raid volumes. Could I add one of my USB 3.0 HDD to the raid volume?
How can I reflect the USB drives in the Storage Manager App. I have been able to create a new volume (volume 3) but not sure how to get the USB 3.0 hdd recognized as a potential raid drive?.
Regards,
Mushtaq
Make USB drive part of raid
-
- Posts: 8
- youtube meble na wymiar Warszawa
- Joined: Thu May 23, 2019 10:54 am
-
- Posts: 8
- Joined: Thu May 23, 2019 10:54 am
Re: Make USB drive part of raid
I have managed to grow the array (raid) size to 5 drives using mdadm commands. However cannot get the Asustor UI to show the right size which is now 8TB, the size is displayed correctly using mdadm commands in shell though.
-
- Posts: 8
- Joined: Thu May 23, 2019 10:54 am
Re: Make USB drive part of raid
Ok, all I had to do was run the commands:
unmount the raid and
e2fsck -f /dev/md2
followed by
resize2fs /dev/md2
and then mount again to show the right size. However the USB disks still appear as missing.
unmount the raid and
e2fsck -f /dev/md2
followed by
resize2fs /dev/md2
and then mount again to show the right size. However the USB disks still appear as missing.