6602T - Purchase questions
Posted: Sun Aug 09, 2020 6:23 am
Hi,
New to the forum and new to Asustor NAS. I am looking to buy the 6602T and purchase 2x16TB HDD for RAID1, another 4GB SO-DIMM DDR4 to increase to 8GB memory and also 1 or 2 m2.2280. A few questions please:
1. For the memory upgrade, is it ok to get non-ECC DIMM ? Can't find specs on whether existing DIMM is ECC or non-ECC.
2. For the M2.2280, this is new to me. Am I correct that this will serve as the SSD cache setup once installed ? Do I simply install 1 or 2 m2.2280, run the "storage manager" and configure as a new volume to use for caching ? If that is correct, does the m2.2280 then serve as a cache for reading/writing data on the 2x16 TB hard drives I will also install ?
3. For an install using 2x16 TB drives, what would be a recommended sizing of m2.2280 ?
thanks !
Enzo
New to the forum and new to Asustor NAS. I am looking to buy the 6602T and purchase 2x16TB HDD for RAID1, another 4GB SO-DIMM DDR4 to increase to 8GB memory and also 1 or 2 m2.2280. A few questions please:
1. For the memory upgrade, is it ok to get non-ECC DIMM ? Can't find specs on whether existing DIMM is ECC or non-ECC.
2. For the M2.2280, this is new to me. Am I correct that this will serve as the SSD cache setup once installed ? Do I simply install 1 or 2 m2.2280, run the "storage manager" and configure as a new volume to use for caching ? If that is correct, does the m2.2280 then serve as a cache for reading/writing data on the 2x16 TB hard drives I will also install ?
3. For an install using 2x16 TB drives, what would be a recommended sizing of m2.2280 ?
thanks !
Enzo