Syncthing GUI is disable when i reboot my NAS

Syncthing replaces proprietary sync and cloud services with something open, trustworthy and decentralized. Your data is your data alone and you deserve to choose where it is stored, if it is shared with some third party and how it's transmitted over the Internet.

Note:
Syncthing will use the port 8384 for GUI management, and port 22000 for Sync protocol.
Please make sure to open the port forwarding via the ADM\Ease of Access\EZ router.

Moderator: Lillian.W@AST

Post Reply
sseodate
Posts: 2
youtube meble na wymiar Warszawa
Joined: Wed Mar 13, 2019 11:54 am

Syncthing GUI is disable when i reboot my NAS

Post by sseodate »

I;m using ADM 3.26 with Syncthing 1.1.0. This app is quite good and i created a chain of 10 NAS using Syncthing and 1 PC to keep file update in realtime.

But there is one problem:

When my NAS run reboot command, Syncthing seem to be disable and going out of connection. I have to turn off and then turn on using App Central to make it available again (GUI and connection )

Does anyone faced this problem before?
Tks for reading my problem!
Top
sseodate
Posts: 2
Joined: Wed Mar 13, 2019 11:54 am

Re: Syncthing GUI is disable when i reboot my NAS

Post by sseodate »

update,

After i work around with :

1. change sleep from 1 to 20 in start-stop.sh
2. create webhost on Asustor
3. create mariadb services on Asutor

it;s work! but i dont understand why?? anyone help?
Top
Post Reply

Return to “Syncthing”