[APKG Native JDownloader2] 2.0-1.6 for ADM 3.x & ADM 4.x
Posted: Wed Mar 30, 2016 7:57 pm
Hi,
I am please to announce the availability of a new version of JDownloader2
$$$$$ IT'S a NATIVE version not a container ... so all is know and visible.
========== NEW version 2.0-1.6 for ADM 3.x AND ADM 4.x ... All architecture. (fresh install (update from 2.0-1.5 works as well BUT NOT from previous version for ADM 4.x)
========== THIS VERSION IS UNDER Asustor VALIDATION IN APPCENTRAL (so download only if you want to use it quickly)
Archive :
========== version 2.0-1.3 for ADM 2.x firmware (fresh install)
========== NEW version 2.0-1.4 for ADM 3.x firmware (fresh install ONLY don't need if update to 3.x is AFTER installing 2.x version of Jdownloader)
========== NEW version 2.0-1.5 ADM 3.x Entware in place of Entware-ng support also ARM64
ATTENTION === due to the product itself the procedure is a little more complex.
read the How-to, read the how-to, read the how-to ... and in case of : read the how-to hereafter
PREREQUIS :
CREATE an account in jdownloader site : http://my.jdownloader.org/login.html
Entware ... for complete GNU tools (Asustor provide only Busybox version)
jre ... normal JDownloader is a java program ( I hope you like not secure eater of resources CPU, Memory you will like it ... )
AND
how open a console (ssh or telnet) and enter basic commands ...
AND
an Internet connection valid and remember elapse time depend of the bandwidth ...
[Anxious about entware update from JDowloader APKG ?]
before install you can do ...
opkg update ; opkg upgrade
then install
opkg install bash bc coreutils coreutils-cat coreutils-ln coreutils-mkdir coreutils-tail grep sed
after install (do be sure all is here) you can do
opkg list_installed ... and do a visual verification
[Name]
JDownloader2
[Versions]
2.0-1.6
... support for ADM 3.x AND ADM 4.x
... add a terminal command to manage JDownloader2 : jdl2 (jd and letter l 2)
... disable APKG after install UP you have run the init (read hereafter) (after APKG install, refresh to see the real status (change 5 sec. after end of install)
2.0-1.5
... FRESH install ONLY
... REQUIRE Entware in place of Entware-ng (so need to uninstall ng to install new Entware 1.0
... support JRE (last updated) from Asustor (no need to use alternate JRE delivery
... support for NAS ARM64 series ...
2.0-1.4.1
... suppress option -norestart that complexify in normal usage the internal update process (bug is : manual restart required)
2.0-1.4
MANDATORY for a FRESH install under A.D.M. 3.0
... support using ANOTHER JRE (even official JRE stay a perquisite)
... scripts change to comply A.D.M. 3.0 change in APKG management
2.0-1.3
NOT A MANDATORY update ... depend of your usage ...
... due to previous modification (URL generation) AND due to architecture use by Asustor for APKG Web Server application
... ... a problem exist : you can't Disable jdownloader (thanks to Vincent to discover this problem) (normally no reason ... because it's here to download in background )
... This version solve this bug by returning to the "official" methodology require by Asustor (even if I have some difficulty to understand ... but I am not in the Asustor's team)
2.0-1.2
... solve problem of URL generated by JDownloader icon in ADM
... manage upgrade WITHOPUT lost of your own configuration
2.0-1.1
... add more description with link to init phase need to finish install
2.0
initial release
[How-to MUST BE READ FIRST]
1 install the APKG ... it go automatically to Disable state
2 run in a console THIS will be done ONLY one time :
/usr/local/AppCentral/jdownloader/init.sh
OR NEW just do :jdl2 initjd
READ carefully ALL the message displayed BEFORE starting each phase ...
... this start a first java program to update and install ALL the structure
... LOT LOT LOT of message are displayed ... be patient
... IF YOU SEE a message "do you want to update y/n" or like ... ALWAYS answer y YES
AFTER the update ... and 10 seconds more ... the java program is killed
... you have to validate (just to see an error if appear ... )
... this restart a second step of java
... LOT LOT LOT of message are displayed ... be patient
DURING this phase you are asked to enter email and password (your jdownloader account)
... answer y (yes) to enter credentials
... enter your email
... enter your password
WHEN " set CONNECTED" OR "Update Messages: xxx" then nothing more on screen
if one is displayed AND only when ... (be patient ... again)
... use <CTRL>C (control+ c) to break and kill GRACEFULLY (don't use other method) the java program ... and wait for all message up to the end
It's finish now script Enable APKG
Then connect to : http://my.jdownloader.org/login.html
AND FIRST change the download folder best is to use : /share/Download BUT you can create your own ...
GOOD idea is to change the device.name (settings/advanced in Jdownloader interface ... if you run multiple instance on multiple NAS to identify your NAS
Alternatively you can use the Web link created in your local Web server : http://your_ip_or_name:your_port_or_default/JDownloader2
... but it's only a redirection to http://my.jdownloader.org/login.html (all is managed from my.jdownloader site)
[Cron]
When you start the APKG ... 2 (two) cron task are created
One to free memory for other (frequency depend of the memory available) Java is a memory eater ...
One each day 1 of each month to clean temporary folders (in jdownloader)
BUT each can be started manually using /usr/local/AppCentral/jdownloader/CONTROL/start-stop.sh jd_clean_tmp or jd_clean_cache (memory)
[Download]
APKG 2.0-1.6 : https://www.father-mande.ovh/A/apkg/jdo ... .6_any.apk
[Support]
http://my.jdownloader.org/index.html to get other client or wiki and F.A.Q.
Android : https://play.google.com/store/apps/deta ... yjdandroid
Captcha solver : http://www.9kw.eu/register.html (account and paid for ... )
If you don't have an account on http://www.9kw.eu/register.html service make one on it, it's a captchas solver. The best thinks about it, is that if you don't want to buy some captcha credits, you can participate, solving some captchas and earn captcha credits!
Have fun.
Philippe.
I am please to announce the availability of a new version of JDownloader2
$$$$$ IT'S a NATIVE version not a container ... so all is know and visible.
========== NEW version 2.0-1.6 for ADM 3.x AND ADM 4.x ... All architecture. (fresh install (update from 2.0-1.5 works as well BUT NOT from previous version for ADM 4.x)
========== THIS VERSION IS UNDER Asustor VALIDATION IN APPCENTRAL (so download only if you want to use it quickly)
Archive :
========== version 2.0-1.3 for ADM 2.x firmware (fresh install)
========== NEW version 2.0-1.4 for ADM 3.x firmware (fresh install ONLY don't need if update to 3.x is AFTER installing 2.x version of Jdownloader)
========== NEW version 2.0-1.5 ADM 3.x Entware in place of Entware-ng support also ARM64
ATTENTION === due to the product itself the procedure is a little more complex.
read the How-to, read the how-to, read the how-to ... and in case of : read the how-to hereafter
PREREQUIS :
CREATE an account in jdownloader site : http://my.jdownloader.org/login.html
Entware ... for complete GNU tools (Asustor provide only Busybox version)
jre ... normal JDownloader is a java program ( I hope you like not secure eater of resources CPU, Memory you will like it ... )
AND
how open a console (ssh or telnet) and enter basic commands ...
AND
an Internet connection valid and remember elapse time depend of the bandwidth ...
[Anxious about entware update from JDowloader APKG ?]
before install you can do ...
opkg update ; opkg upgrade
then install
opkg install bash bc coreutils coreutils-cat coreutils-ln coreutils-mkdir coreutils-tail grep sed
after install (do be sure all is here) you can do
opkg list_installed ... and do a visual verification
[Name]
JDownloader2
[Versions]
2.0-1.6
... support for ADM 3.x AND ADM 4.x
... add a terminal command to manage JDownloader2 : jdl2 (jd and letter l 2)
... disable APKG after install UP you have run the init (read hereafter) (after APKG install, refresh to see the real status (change 5 sec. after end of install)
2.0-1.5
... FRESH install ONLY
... REQUIRE Entware in place of Entware-ng (so need to uninstall ng to install new Entware 1.0
... support JRE (last updated) from Asustor (no need to use alternate JRE delivery
... support for NAS ARM64 series ...
2.0-1.4.1
... suppress option -norestart that complexify in normal usage the internal update process (bug is : manual restart required)
2.0-1.4
MANDATORY for a FRESH install under A.D.M. 3.0
... support using ANOTHER JRE (even official JRE stay a perquisite)
... scripts change to comply A.D.M. 3.0 change in APKG management
2.0-1.3
NOT A MANDATORY update ... depend of your usage ...
... due to previous modification (URL generation) AND due to architecture use by Asustor for APKG Web Server application
... ... a problem exist : you can't Disable jdownloader (thanks to Vincent to discover this problem) (normally no reason ... because it's here to download in background )
... This version solve this bug by returning to the "official" methodology require by Asustor (even if I have some difficulty to understand ... but I am not in the Asustor's team)
2.0-1.2
... solve problem of URL generated by JDownloader icon in ADM
... manage upgrade WITHOPUT lost of your own configuration
2.0-1.1
... add more description with link to init phase need to finish install
2.0
initial release
[How-to MUST BE READ FIRST]
1 install the APKG ... it go automatically to Disable state
2 run in a console THIS will be done ONLY one time :
/usr/local/AppCentral/jdownloader/init.sh
OR NEW just do :jdl2 initjd
READ carefully ALL the message displayed BEFORE starting each phase ...
... this start a first java program to update and install ALL the structure
... LOT LOT LOT of message are displayed ... be patient
... IF YOU SEE a message "do you want to update y/n" or like ... ALWAYS answer y YES
AFTER the update ... and 10 seconds more ... the java program is killed
... you have to validate (just to see an error if appear ... )
... this restart a second step of java
... LOT LOT LOT of message are displayed ... be patient
DURING this phase you are asked to enter email and password (your jdownloader account)
... answer y (yes) to enter credentials
... enter your email
... enter your password
WHEN " set CONNECTED" OR "Update Messages: xxx" then nothing more on screen
if one is displayed AND only when ... (be patient ... again)
... use <CTRL>C (control+ c) to break and kill GRACEFULLY (don't use other method) the java program ... and wait for all message up to the end
It's finish now script Enable APKG
Then connect to : http://my.jdownloader.org/login.html
AND FIRST change the download folder best is to use : /share/Download BUT you can create your own ...
GOOD idea is to change the device.name (settings/advanced in Jdownloader interface ... if you run multiple instance on multiple NAS to identify your NAS
Alternatively you can use the Web link created in your local Web server : http://your_ip_or_name:your_port_or_default/JDownloader2
... but it's only a redirection to http://my.jdownloader.org/login.html (all is managed from my.jdownloader site)
[Cron]
When you start the APKG ... 2 (two) cron task are created
One to free memory for other (frequency depend of the memory available) Java is a memory eater ...
One each day 1 of each month to clean temporary folders (in jdownloader)
BUT each can be started manually using /usr/local/AppCentral/jdownloader/CONTROL/start-stop.sh jd_clean_tmp or jd_clean_cache (memory)
[Download]
APKG 2.0-1.6 : https://www.father-mande.ovh/A/apkg/jdo ... .6_any.apk
[Support]
http://my.jdownloader.org/index.html to get other client or wiki and F.A.Q.
Android : https://play.google.com/store/apps/deta ... yjdandroid
Captcha solver : http://www.9kw.eu/register.html (account and paid for ... )
If you don't have an account on http://www.9kw.eu/register.html service make one on it, it's a captchas solver. The best thinks about it, is that if you don't want to buy some captcha credits, you can participate, solving some captchas and earn captcha credits!
Have fun.
Philippe.