Tvheadend ?

[eightace]

I have installed the apk but it doesn't detect my TV stick. Is there a list of hardware this software will support?
Or do I need to do something else?

[z1022]

zenomega

Which is 32bit only.

[Jhinta]

I have installed the apk but it doesn't detect my TV stick. Is there a list of hardware this software will support?
Or do I need to do something else?

For dvb even to work you need your kernelmodules for that stick dmesg will show you that, also installing dvblink will provide some drivers if your lucky you have one of them. Also if you load manual there is a change that you have to creatie /dev/dvb and other for the app to see it . do a google Android tvheadend its like 99% the same. And x86 app wil not run on x64 (asustor that is)

Also i already have tvheadend running , you can easly build it but i cant test it as i cant find the right way to build my modules for my tuner . waiting for response from Asus and dvblink

[zenomega]

zenomega

Which is 32bit only.

Your app here http://www.hkepc.com/forum/viewthread.p ... a=page%3D1
Is I believe only for the AS-2XX, AS-3XX series of Asustor nas units, I was enquiring if its possible to have it for the AS-602 series, which are not arm based but atom processors.

[z1022]

I did not install 64bit OS. You can compile by yourself.

git clone -b release/4.0 https://github.com/tvheadend/tvheadend.git tvheadend-4.0.3
cd tvheadend-4.0.3
./configure --host=i686-pc-linux --build=i686-pc-linux --target=i686-pc-linux --prefix=/opt/tv_ori --disable-avahi --disable-uriparser --enable-bundle --release
make && make install

[Jhinta]

so who is willing to test binary?
mainline build

[zenomega]

so who is willing to test binary?
mainline build

I would be happy to try it on my AS-602T thanks!

[Jhinta]

so who is willing to test binary?
mainline build

I would be happy to try it on my AS-602T thanks!

you have mail

let us know how it go's

[zenomega]

Thanks Jhinta downloading as we speak will let you know how I get on

[zenomega]

First problem is this message after trying to run the binary with ... #./tvheadend

./tvheadend: error while loading shared libraries: libssl.so.0.9.8: cannot open shared object file: No such file or directory

so looks like we need libssl??