Can't connect to CrashPlan server running on my NAS
Moderator: Lillian.W@AST
-
- Posts: 9
- youtube meble na wymiar Warszawa
- Joined: Fri Nov 07, 2014 6:42 pm
- Location: UK - Manchester
Re: Can't connect to CrashPlan server running on my NAS
Has anyone managed to stop Crashplan for trying to update? Works great still on 4.5.2 but looks like the ui_info gets overwritten/replaced when Crashplan tries to update.
===========================
AS-604T
AS-RCU IR Remote
AS-604T
AS-RCU IR Remote
-
- Posts: 1
- Joined: Sun Jun 19, 2016 3:09 am
Re: Can't connect to CrashPlan server running on my NAS
Hello everybody,
I have been already once unsuccessfully trying to get crashplan running on my Asustor AS-304T. I have upgraded my hardware now and try the same on the Asustor AS-7004T. I have been trying with and without port forwarding via ssh, but never can get any connection. I use the newest client (4.7) on Linux to try to connect.
When I check what ports are listened to (being on the NAS) with "netstat -na | grep LISTEN | grep 42" I get:
However, when I do a port scan from another computer with "nmap -sT -O 192.168.0.5" I do not see the crashplan port:
Any help is appreciated!
Michael
I have been already once unsuccessfully trying to get crashplan running on my Asustor AS-304T. I have upgraded my hardware now and try the same on the Asustor AS-7004T. I have been trying with and without port forwarding via ssh, but never can get any connection. I use the newest client (4.7) on Linux to try to connect.
When I check what ports are listened to (being on the NAS) with "netstat -na | grep LISTEN | grep 42" I get:
Code: Select all
tcp 0 0 :::4242 :::* LISTEN
tcp 0 0 :::4243 :::* LISTEN
Code: Select all
Starting Nmap 7.01 ( https://nmap.org ) at 2016-06-18 21:56 EEST
Nmap scan report for 192.168.0.5
Host is up (0.0016s latency).
Not shown: 986 closed ports
PORT STATE SERVICE
22/tcp open ssh
80/tcp open http
139/tcp open netbios-ssn
443/tcp open https
445/tcp open microsoft-ds
631/tcp open ipp
873/tcp open rsync
3260/tcp open iscsi
4242/tcp open vrml-multi-use
5001/tcp open commplex-link
8000/tcp open http-alt
8001/tcp open vcom-tunnel
9999/tcp open abyss
55555/tcp open unknown
MAC Address: 10:BF:48:8A:89:DE (Asustek Computer)
Device type: general purpose
Running: Linux 3.X|4.X
OS CPE: cpe:/o:linux:linux_kernel:3 cpe:/o:linux:linux_kernel:4
OS details: Linux 3.2 - 4.0
Network Distance: 1 hop
Michael
-
- Posts: 2
- Joined: Mon Nov 09, 2015 10:12 pm
Re: Can't connect to CrashPlan server running on my NAS
Hi there,
I try to setup the CrashPlan plugin in my 202TE, but, I can only download the CrashPlan v4.7 only.
When I follow the instruction to setup the CrashPlan environment, it seem my CrashPlan client cannot connect to my NAS.
Can anyone advise how to do it?
P.S.: My CrashPlan client is running on MAC
Million thanks,
Louie
I try to setup the CrashPlan plugin in my 202TE, but, I can only download the CrashPlan v4.7 only.
When I follow the instruction to setup the CrashPlan environment, it seem my CrashPlan client cannot connect to my NAS.
Can anyone advise how to do it?
P.S.: My CrashPlan client is running on MAC
Million thanks,
Louie
-
- Posts: 9
- Joined: Fri Nov 07, 2014 6:42 pm
- Location: UK - Manchester
Re: Can't connect to CrashPlan server running on my NAS
Louie - I found that crashplan would not connect if I had not correctly set up the NAS IP addresse as outlined in the instructions early in this post. Also, it needs to be static.
===========================
AS-604T
AS-RCU IR Remote
AS-604T
AS-RCU IR Remote